Nvidia Quadro P2200 schematic or boardview

[mbassi]

I’m troubleshooting an NVIDIA Quadro P2200 graphics card that isn’t recognized by Windows. I’ve discovered a missing SMD probably 180 Ω 0402 resistor on the opposite side of the PCB from the GDDR5 memory chip labeled M1.

To proceed with the repair, I’m looking for a schematic or boardview file for this card — or any other confirmation regarding proper spare parts needed.





If anyone has access to service documentation, layouts, or high-res boardview screenshots, I'd be grateful for any shared resources.

[danmusatr]

That one that's missing is the exact same capacitor as the one above it. I have the card right in front of me so I am 100 percent sure. You can use one from any other video card from memory areas. It only has to look the same size. It will work 100 percent.

[mbassi]

Thanks for the replay, do you think this makes my GPU alive again? All voltages seems to be fine, but this one is missing. Is it so important it may even prevent GPU to be not recognized by system?

[danmusatr]

A lot of cards have all of the voltages but don't work. If that cap is missing, your card may not show image. Replace that capacitor and see if it is working again. It should be something extremely easy.