Hi to all.
I´de like some help in this issue.
I have a plasma Pioneer with only less than half screen working.
I´ve checked:
Scan IC´s all ok not shorted.
All voltages Y and X boards ok.
Recheck Cables to Digital board.
At first customer claims no image 3 times blinking red.
After rechecking flat cables the TV power on but half image.
you can see very near an horizontal line black with 1 inche lower image, and the rest of the panel off.
I´ve attached some pictures. One with dvd image and one with menu.
Thanks
I´de like some help in this issue.
I have a plasma Pioneer with only less than half screen working.
I´ve checked:
Scan IC´s all ok not shorted.
All voltages Y and X boards ok.
Recheck Cables to Digital board.
At first customer claims no image 3 times blinking red.
After rechecking flat cables the TV power on but half image.
you can see very near an horizontal line black with 1 inche lower image, and the rest of the panel off.
I´ve attached some pictures. One with dvd image and one with menu.
Thanks
Comment