Hi guys i stripped this LG50LN5100 and found a Burned led,it's the L 8th strip counting from the top; check attach. i don't have 24v dc power sup. but i have 18 and 12 dc,can i use it to check if there are other bad leds? Thanks
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Burned led on this LG50LN5100
Collapse
X
-
Re: Burned led on this LG50LN5100
Originally posted by kc8adu View Poststrip is toast pardon the pun.common to see burnups on the ln sets.
Comment
-
Re: Burned led on this LG50LN5100
Originally posted by jotto View Postyou can just use a digital meter on diode check and it will light up the led if it is good.
Comment
-
Re: Burned led on this LG50LN5100
If you don't want to wait, call Pacific Illumination they might be able to make them for you. I used another company years ago before LEDs were installed in LCD units, but I can't remember the name.
Send them a email at pacificillumination@gmail.com, since this will be a order they might send you to MCM. You will probably have to install your harness to the strip. MCM only sells 12vdc units, didn't see any 24vdc. They are geared to primarily casinos.
Comment
-
Re: Burned led on this LG50LN5100
Why not cut up any old LG LED strip, take one complete with lens and piggy-back where the original was
Use heatsink plaster to stick in place and thin leads to connect up, just align it reasonably accurately so it lines up with hole in the white reflector sheet--Job done!
Did one just before leaving work today on an LG 32" thing, whole job from back off, to pic on screen 20 mins!
Simples.....TELEFIX
How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
http://www.irf.com/technical-info/appnotes/an-1088.pdf
PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!
Comment
-
Re: Burned led on this LG50LN5100
Originally posted by Alastair E View PostWhy not cut up any old LG LED strip, take one complete with lens and piggy-back where the original was
Use heatsink plaster to stick in place and thin leads to connect up, just align it reasonably accurately so it lines up with hole in the white reflector sheet--Job done!
Did one just before leaving work today on an LG 32" thing, whole job from back off, to pic on screen 20 mins!
Simples.....
Comment
-
Re: Burned led on this LG50LN5100
More shit failing, also I agree with Alis method cheap but cheerfulPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/
Comment
Comment