okay so i have repaired a few monitors before so i am familiar with soldiering and disassembling them anyways i just picked up this Envision EN9410e Monitor out of the garbage plugged it in and the screen turns on and off every few seconds so i took it apart and replaced 3 bad caps that i found now it turns on for like 3 seconds and goes black i can still see the desktop if i get a flashlight but its really hard anyways any help is appreciated
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
ENVISION EN9410e 19" Monitor Bad Caps
Collapse
X
-
Re: ENVISION EN9410e 19" Monitor Bad Caps
Please read this: https://www.badcaps.net/forum/showthread.php?t=10419
and post good clear pictures using GO ADVANCED/ATTACHMENT function to post the pictures.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment