Hey all, long time lurker, first time post. I've started fixing a batch of Viewsonic LCD Monitors. I found the power board with bulged blown caps (capxon greenies, 2x220uf, 1x2200uf and 1x1000uf) and I'm replacing them with same spec Panasonics.
My problem is, the one is working now, but there is no blue color on the LCD. In the OSD Menu, all colors are set to 50% but adjusting them does nothing. This is the second one I recapped, the first I think also has a blown inverter chip for the ccfl bulbs, the screen stays black on that one (though the power LED no longer flashes on and off dim). When I used this second power board in the first monitor, I get the same screen with no blue color.
Anyone see this before? Is the video board blown on both?
My problem is, the one is working now, but there is no blue color on the LCD. In the OSD Menu, all colors are set to 50% but adjusting them does nothing. This is the second one I recapped, the first I think also has a blown inverter chip for the ccfl bulbs, the screen stays black on that one (though the power LED no longer flashes on and off dim). When I used this second power board in the first monitor, I get the same screen with no blue color.
Anyone see this before? Is the video board blown on both?
Comment