I will post the pics later tonight at 6:00 PM EET.
budm I check almost everything. Caps are good, transformers ok, mosfets ok, inverters ok.
Now the power led is solid green but the CCFL lamps won't power on. I have 5 V and 13... So I am in a big cloud
Great pictures of the bottom side but how about the straight shot of the whole top side?
There are Power MOSFETs on that small PCB in the inverter section sitting between the two inverter transformers that should be checked, resistance testing of the high Voltage winding should also be checked.
I will check tomorrow; the board is at my office. I will post also a good picture from top side.
So about 12 hours from now I will post pictures from top side.
Comment