Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Where would you buy the part

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Where would you buy the part

    shopjimmy.com or www.retechtv.com i am looking to buy a z sus board. i have no idea which is more reliable on the parts.

    #2
    Re: Where would you buy the part

    I bought an inverter board from shopjimmy, it came in 2 days and was packed very well.

    They bow the inverter board to make it fit in the secondary box, which is a NO NO! But they were lucky the board work fine.

    Just make sure the numbers match and the picture looks like yours.

    Comment


      #3
      Re: Where would you buy the part

      Thanks i decided to order it from shopjimmy.

      Comment


        #4
        Re: Where would you buy the part

        You should just have the Y or Z boards re-chipped.

        There are several good companies that do this.

        Most are less than 100.00 per board. The older single ipm boards are even cheaper.

        These boards are only good for about 2500 hours. Used boards are a gamble.

        New boards may even be updated and not just swapped ipms out with new ones.
        Last edited by cadiman; 04-24-2012, 05:35 PM.

        Comment

        Working...
        X