This problem apparently started intermittently then gradually became permanent.
I tried reseating the LVDS and T-Con cables at the Tcon board but it didn't help. I suppose I could strip it down further and try reseating the cables at the other end but I thought Tcon cable problems cause vertical lines?
Or is this tab bonds / chip on flex problem yet again!
Rich
I tried reseating the LVDS and T-Con cables at the Tcon board but it didn't help. I suppose I could strip it down further and try reseating the cables at the other end but I thought Tcon cable problems cause vertical lines?
Or is this tab bonds / chip on flex problem yet again!
Rich
Comment