Hi all!
First time poster here, was referred to you by the Whirlpool internet/broadband forums. Must say, it seems like an excellent resource!
I've been running dual 460 cards in SLI for a while, seems one of them was a little loose in it's slot and the heatsink was resting on another cards cap, which exploded. I'm hoping theres no collateral damage.
However, I'm having trouble identifying where to get a replacement cap!
Cap was at the rear (right) of the card, marked PMCE1 on the board. There's two other caps on the board of the same size... PMCE2 and PCE1.
PCE 1 says on its top
5KQ08
270
16v
PMCE2 says
5KQ08 (may be 6, the last digits slightly rubbed off)
270
16v
Heres a shitty iphone gallery showing closeups of the missing cap and other remaining ones. The missing cap did not launch into the stratosphere, I removed it. http://imgur.com/a/ng3Ck
First time poster here, was referred to you by the Whirlpool internet/broadband forums. Must say, it seems like an excellent resource!
I've been running dual 460 cards in SLI for a while, seems one of them was a little loose in it's slot and the heatsink was resting on another cards cap, which exploded. I'm hoping theres no collateral damage.
However, I'm having trouble identifying where to get a replacement cap!
Cap was at the rear (right) of the card, marked PMCE1 on the board. There's two other caps on the board of the same size... PMCE2 and PCE1.
PCE 1 says on its top
5KQ08
270
16v
PMCE2 says
5KQ08 (may be 6, the last digits slightly rubbed off)
270
16v
Heres a shitty iphone gallery showing closeups of the missing cap and other remaining ones. The missing cap did not launch into the stratosphere, I removed it. http://imgur.com/a/ng3Ck
Comment