-
Hİ DA0U36MB6D0 REV: D gpu bricked uma conversion need Is this possible?
please help07-26-2021, 02:36 AM -
Hi everyone, I have a problem with my Hp15-B040SL
with a main DA0UMB6D0 rev D, when I turn it on I have no signal on the screen and after 10/15 sec the fan starts spinning at maximum rpm but remains on.
The cpu is cold and I don't detect any voltage at the coil "PL17" "+ VCC core".
I'll post the bios obtained.
Thank you in advantage for help to me... -
Hi everyone, I have a problem with my Hp15-B040SL
with a main DA0UMB6D0 rev D, when I turn it on I have no signal on the screen and after 10/15 sec the fan starts spinning at maximum rpm but remains on.
can someone give me a hand to solve the problem?
I previously downloaded the wiring diagram and some published bios.
from the diagrams this mainb appears to have 2 spi U10 for EC (ENE) and U22 bios
Can anyone guide me in researching this problem?
Thank you IN ADVANTAGE -
Hello.
Have this HP 15 da0u36mb6d0 rev d bios that start without video.
I chceck that have no power to CPU and GPU. to NCP6132B comes power, but on EN pin is 1.05V. On that pin must be logic HIGH but 1V is quite low to me. i flashed bios and EC but still the same. Other voltages is all good
What u think?...04-08-2020, 03:45 AM -
Hi already check the hdd cable no problem The hardive turns , not detecting I tried ssd drive but no luck. Ive check the 5v voltage is present in CN20
https://www.badcaps.net/forum/attach...8&d=1435834401
Working...
😀
😂
🥰
😘
🤢
😎
😞
😡
👍
👎
☕