Announcement

Collapse
No announcement yet.

New Members - please post your introductions here

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: New Members - please post your introductions here

    Have you check your input Voltage to the inverter? That would be step one.
    Preferably with a O-scope so you can see if it is a clean voltage, or full of ripple.
    Then check the output if you have a meter than can handle the output high voltage.
    Do you have any info on what the voltages should be?

    Comment


      Re: New Members - please post your introductions here

      Hello Everyone, I just joined this forum, but I have read many posts on it which pointed me in the right direction on a repair or, made me say "Hmmm." I have been in the electronic repair field for more than thirty five years. My initial training was in audio systems using vacuum tubes. Most of my time is now taken up in the repair/restoration of vintage audio systems.

      Comment


        Re: New Members - please post your introductions here

        Hello everyone - I am a new forum poster though I've frequently browsed BadCaps for information regarding my electronics. I hope I can find some help here regarding my TV.

        Comment


          Re: New Members - please post your introductions here

          Have you gotten any help yet?

          Comment


            Re: New Members - please post your introductions here

            Hello everyone,

            Longtime forum lurker here. I like that there is a place where we can share our knowledge of electronics. As you all know the corporations dont like to have too many people know how to repair their electronics so this forum is just right for me because I am a die hard do-it-yourselfer!

            Comment


              Re: New Members - please post your introductions here

              Long time lurker, fixed quite a few tv's. Need help with an oldie and don't want to spend $50 on new power supply for a maybe.

              Comment


                Re: New Members - please post your introductions here

                Hello!
                What kind of oldie? A crt?
                -Lemur

                Comment


                  Re: New Members - please post your introductions here

                  Originally posted by ENERGYSAVINGS View Post
                  Hello!
                  What kind of oldie? A crt?
                  -Lemur
                  Please post your questions and answers in the appropriate section, not the introductions thread!
                  "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                  -David VanHorn

                  Comment


                    Re: New Members - please post your introductions here

                    How do we get to that section? Cute quote by the way!

                    Comment


                      Re: New Members - please post your introductions here

                      TV Repair is this forum: https://www.badcaps.net/forum/forumdisplay.php?f=31
                      Cheers
                      "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                      -David VanHorn

                      Comment


                        Re: New Members - please post your introductions here

                        Agent24
                        Sorry bout the mis-postings
                        -Lemur

                        Comment


                          Re: New Members - please post your introductions here

                          Hi, new member, getting back into electronics after an electronics A-level 10yrs ago and not much since.

                          Comment


                            Re: New Members - please post your introductions here

                            Hi,

                            New member hoping to be able to fix some dodgy LCD TVs and monitors I have sitting about

                            Comment


                              Re: New Members - please post your introductions here

                              Hello, I am Butch from NC. I have a very bad problem/habit, I like nice things but am to cheap to buy them so I always end up with peoples broken stuff and I fix it and use it myself. Most of the time this works out as long as I figure my labor and research time at about 5 cents per hour.

                              Comment


                                Re: New Members - please post your introductions here

                                hi.\
                                i be back.
                                shalom.
                                melech

                                Comment


                                  Re: New Members - please post your introductions here

                                  hi everyone. I just found this site and enjoyed reading some of the repair info

                                  Comment


                                    Re: New Members - please post your introductions here

                                    Hi, I come from singapore.

                                    Comment


                                      Re: New Members - please post your introductions here

                                      Hey all, I am 21 year old looking to get my scpetre 32in sorted out. From the looks of it many have had similar problems

                                      Comment


                                        Re: New Members - please post your introductions here

                                        Hi I am new to forum I haven't done much component level shooting since the late 80s in school. be great to get back to it Larry


                                        "Once a man has seen society's black underbelly, he can never turn his back on it. Never pretend, that it doesn't exist"

                                        Comment


                                          Re: New Members - please post your introductions here

                                          Hello, My name is Chris and I have issues with My samsung ps51d6900..... It won't switch on the front power light just keeps flashing.

                                          Hopefully someone on the site will know what's causing it.

                                          Cheers
                                          Chris

                                          Comment

                                          Working...
                                          X