Re: New Members - please post your introductions here
Hmmm since it has come to the stage where first laptops /computer Leeds I the Biafran is excited 😃 to be part of this noble forum.My early physical contact with computer was during my high school days back then in the 90s Hp computer system for teaching was so excited to have seen it physically.My first laptop DELL was during my university days as it was mandatory for our studies ever since,my passion for Electronics blossoms.I am proudly BIAFRAN.Thank God I found you(BADCAPS).
Re: New Members - please post your introductions here
What's good, BadCaps members?!
I've just retired from the U.S. military and started a small repair business in Virginia. Rough timing for sure, but I already have some customers and I'm also providing services to First Responders for free during the pandemic. It's my hunch that this may be good for the repair industry as a whole, but we shall see. Until then, may your irons stay busy my friends.
I am brand new to your site. Thanks for having me.
I have a 55" Samsung PN58B540, and it suddenly stopped working today. The screen just went black, and it clicked 3 times. It has worked perfectly until now. It has power. From what I see on UTube, it sounds like it may be the X axis board??
I unplugged both of what I believe to be X and Y, trying to troubleshoot, and then plugged in the power. It made the start up music, and the two little green lights on the small center back panel (A) lit up. The picture does not come on, but the red light is on in front. The large center panel (B) clicks loudly 3 or 4 times upon power up every time. The exact same happened after plugging in the X and Y panels.
I attached pics of the boards (properly tagged I hope). Thanks a ton for all and any help!
Re: New Members - please post your introductions here
Hello, My name is Xander and I joined this site because I needed some BIOS information. I also do computer support so any troubleshooting info is great. THANKS!
Re: New Members - please post your introductions here
Hey guys! My name is Nick and I am 14, I found this tv from 2013 and I'm trying to fix it, I came to this forum looking for support. I am capable of building a pc and other stuff with electronics, I just came here to look for some answers.
Re: New Members - please post your introductions here
Hello everybody...
My name is Gary, and as a rule I don't do forums, but I think I will like this one. 40 years in the electronics field, I am now reduced to repairing things like old HP oscilloscopes and customising laptops. There is not much I have not done, and yes, I've had my fair share of bad capacitors.
Re: New Members - please post your introductions here
Name Davidescu Razvan
34 - 11 Ian 1978
Married,we have a little girl age of 3
MO: Service,mentanance and DJ
I am dependent on technology and very passionate guy by new and old technology
at the time no job because of Pandemic cov19
Re: New Members - please post your introductions here
i need help i have an acer aspire 3 model is A315-51
my unlock password is 1613391026 and i was kindly asking for a BIOS password recovery key most of the sites i visited needed me to pay nd on some the recovery passwords were not working so am kindly asking for assistance
Comment