Sharp LC-40FG2241KF failed LED boost converter

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MarkC1970
    Member
    • Feb 2022
    • 22
    • Wales

    #1

    Sharp LC-40FG2241KF failed LED boost converter

    My Sharp LC-40FG2241KF with a TP.MS6486.PB711 mainboard has a failed LED boost converter. The FET (AOD458) was s/c and the rectifier/blocking diode (SR320) was also s/c. Both were changed as well as the input and output caps.

    On powering the TV we get 55v on the LED rail. Immediately we take the TV out of standby the controller (OB3350CP) starts to trigger the Gate of the FET and it dies again (with smoke no less). The inductor is incredibly low resistance at 0.09 Ohms and I suspect it is short and so the FET is directly grounding the 55v supply, but I may be mistaken. Scoping the Gate without the FET installed reveals a pulse of a few uSecs so I think it is been driven correctly.

    Additionally, the SR320 also dies again so maybe it isn't the inductor as I can't see why that would kill the diode when the current is flowing through only the FET.

    The TV's had valves when I first started repairing them so things have changed a lot and I would appreciate any advice on the new wizardry. I can't find the correct schematic online and that would be a great help.

    Thank you everyone...
  • dskall
    Badcaps Legend
    • Oct 2016
    • 2905
    • usa

    #2
    Re: Sharp LC-40FG2241KF failed LED boost converter

    Some good board pictures would help.
    I assume no responsibility for any stupid suggestions I might post.

    Comment

    Related Topics

    Collapse

    • d_ne0
      Help to identify a boost converter IC
      by d_ne0
      Hello guys!
      I am asking for help because I have an Bresser Biolux Touch 5mp microscope with an 4.3 inch tft that has no backlight.I have found that the boost ic that supposed to boost the 5v voltage for backlight is dead.The marking on the ic is : S87BaAA and is a SOT23 6 pin.I cannot find any result googling.I have replaced it with a generic boost converter and the device works,but backlight is always on,I need the datasheet of the original IC to find out how it works...I cannot find any schematics either.Maybe somebody has an idea...
      Thanks!
      01-14-2023, 01:50 PM
    • Document Archive
      HP EliteBook x360 1030 G3 + Samsonite Base Boost Hybrid (2-in-1) Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP EliteBook x360 1030 G3 + Samsonite Base Boost Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 1030 G3 + Samsonite Base Boost boardview and 1030 G3 + Samsonite Base Boost schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we...
      09-06-2024, 09:00 AM
    • Document Archive
      HP ProBook 450 G6 + Samsonite Base Boost Notebook 400 Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP ProBook 450 G6 + Samsonite Base Boost Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 450 G6 + Samsonite Base Boost boardview and 450 G6 + Samsonite Base Boost schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
      09-06-2024, 09:00 AM
    • Document Archive
      HP EliteBook 1050 G1 + Samsonite Base Boost Notebook 1000 Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP EliteBook 1050 G1 + Samsonite Base Boost Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 1050 G1 + Samsonite Base Boost boardview and 1050 G1 + Samsonite Base Boost schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
      09-06-2024, 09:00 AM
    • Document Archive
      HP EliteBook x360 1030 G3 + Samsonite Base Boost Hybrid (2-in-1) Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP EliteBook x360 1030 G3 + Samsonite Base Boost Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 1030 G3 + Samsonite Base Boost boardview and 1030 G3 + Samsonite Base Boost schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we...
      09-06-2024, 09:00 AM
    • Loading...
    • No more items.
    Working...