I have a vestel 55” chassis VES550QNDS with 17mb130s main board, the tv brand is Teac and its the LE55A4S1UHD. Originally had blinking standby light of death. Tried a panasonic firmware which worked, loaded to language page and I had thought it was frozen, turned out the remote obviously didn't work because it was panasonic firmware (stupid me). I tried loading another firmware I was sent which corrupted or something and now as soon as the tv is plugged in it does the blinking standby light straight away without trying to power on. I can hold the ok button on my remote when I first plug the tv in to update the firmware but now it does not recognise the firmware at all.
What are my options from here? Im obviously a noob and only learning, my only tv repair experience is changing bad caps on plasmas haha.
Any help is much appreciated.
If it comes down to having to replace my main board, can I use any 17mb130s providing all the connections are the same or does it have to be the exact model.
What are my options from here? Im obviously a noob and only learning, my only tv repair experience is changing bad caps on plasmas haha.
Any help is much appreciated.
If it comes down to having to replace my main board, can I use any 17mb130s providing all the connections are the same or does it have to be the exact model.
Comment