LG 26lk335C Led blinking

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • asus1990
    New Member
    • Dec 2020
    • 7
    • PT

    #1

    LG 26lk335C Led blinking

    LG 26lk335C Led blink

    SOURCE LGP32-11P EAX63985401
    Tv without picture and sound
    Defect in 3.5v is with 4.5v
    Disassembled panel and tested lamps
    All correct voltages in the 24v inverter
    Source voltages also correct 12/24

    Thanks

Related Topics

Collapse

  • objecttothis
    EVGA 430W PSU Correct voltages but computer won't turn on
    by objecttothis
    I had a desktop form factor mini-server die on me a few weeks ago. Through my initial diagnostics, I was convinced it was the motherboard because when I shorted the Green wire on the ATX connecter, the multimeter gave me all the correct voltages on the various pins of the ATX connector and 5VSTB was also correct. To my surprise the replacement motherboard wouldn't turn on with the case power button either. I threw in another PSU and it turned on right away. This is an 80 Plus EVGA 430W PSU with PN:100-W1-0430. I pulled the cover off and don't see any immediately obvious blown caps or scorch...
    02-08-2025, 11:19 AM
  • Capacitorial
    Powersupply has all the voltages - Monitor still no power
    by Capacitorial
    Hello guys,

    I have a Philips 240B7QPJEB. The monitor seems completely dead.
    I opened it and measured the voltages of the powersupply. I found that a mosfet was dead and replaced it.
    On the connector, that goes to the TCON board, all voltages 15-19V and 5V are present.
    The small connector on the left of the PSU has two cables with 18V and all the other have 0.2V. It connects on this small connector on the left ontop of the panel. I guess the backlight? Seens fine I guess.
    The weird thing is, that the Power LED is powered over the TCON board.
    On The TCON...
    12-28-2024, 02:12 PM
  • fsdecosat
    Problem with sony dav-dz830w
    by fsdecosat
    Hello, I have a sony dav-dz830w home cinema, which does not start, I have disassembled it and I have removed the model 07dav-power-13-mp power supply.
    I don't have much knowledge of electronics, but I started by checking the fuse and the transformers, and they gave me the correct values.
    Later I checked the voltages with the power board outside the unit, I got the schematic in addition to the board to be able to check the problem.
    When reviewing the voltages of the different connectors, I obtained the following values in the CN906, which I think is the one that starts the...
    04-27-2023, 08:48 AM
  • Exim
    ASRock N100M, no picture no boot, but semi-alive
    by Exim
    Hi guys,
    I managed to semi-kill an ASRock N100M board after updating Bios from 1.10 to 2.01. It's a zombie now, dead, but not dead.

    ASRock N100M special features:
    - CPU soldered to board, small Intel 12th gen
    - iGPU
    - four POST LEDs

    Problem after updating Bios to 2.01 using the in-Bios update tool: no picture, no boot.
    I am not sure anymore if it booted at least once successfully after updating the bios to 2.01, maybe not, I can't remember. I think it did not.

    Symptoms:
    - no picture/signal on any of the display connectors,...
    04-01-2025, 02:36 PM
  • YasaCh
    Sony kdl 40p5500 red light keeps blinking 3 times
    by YasaCh
    Hello...
    my tv almost 2 years not powerd on and when i turned it on nothing happened and only 3 red light keeps blinking
    i opened the back cover no sign of damage on the powery suply or motherboard
    when i plug in the power i hear the reley sound like tik first and another tik..after that only red keep blinking..
    another thing is even after i unplugged the power, The tv keeps red blinking 3 times for 2 almost 2 munites
    07-07-2025, 11:53 AM
  • Loading...
  • No more items.
Working...