Samsung PS51D450 (plasma) Y-Main is compatible?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • samwilson
    New Member
    • Mar 2020
    • 4
    • España

    #1

    Samsung PS51D450 (plasma) Y-Main is compatible?

    Good Morning, I recently got this TV, which has a breakdown in y-main. The problem is that I recently got a y-main that supposedly works for my tv. But I'm not sure. Since it has 3 connectors, instead of 4 connectors.Both plates have the same numbering, but they are different revisions, one 1.4 (my tv) and the other 1.5.

    Thanks and sorry for bothering.
    P.D: At shopjimmy it says that you can replace one with the other. But I prefer to make sure.

    The one on the left is the one with the TV and the one on the right is the y-main that has arrived. I have marked the differences, which I have seen.
  • tvtimmy
    Badcaps Legend
    • Mar 2015
    • 1160
    • usa

    #2
    Re: Samsung PS51D450 (plasma) Y-Main is compatible?

    I had one like that. It will work.

    Comment

    • samwilson
      New Member
      • Mar 2020
      • 4
      • España

      #3
      Re: Samsung PS51D450 (plasma) Y-Main is compatible?

      Originally posted by tvtimmy
      I had one like that. It will work.
      And did not have any problem, that a connector of y-buffer had nothing connected? Also thank you very much.

      Comment

      • tvtimmy
        Badcaps Legend
        • Mar 2015
        • 1160
        • usa

        #4
        Re: Samsung PS51D450 (plasma) Y-Main is compatible?

        It may turn the tv into SD instead of HD but no problems.

        Comment

        • dick_barton
          Badcaps Legend
          • Aug 2015
          • 6642
          • Wales

          #5
          Re: Samsung PS51D450 (plasma) Y-Main is compatible?

          And did not have any problem, that a connector of y-buffer had nothing connected?
          I would have thought that it would be a problem with one of the buffer connections missing. But I'm prepared to live and learn.

          Is it possible to populate one board with parts from the other board?
          Last edited by dick_barton; 04-29-2020, 06:15 AM.
          Willing to help but I'm no expert.

          Comment

          • samwilson
            New Member
            • Mar 2020
            • 4
            • España

            #6
            Re: Samsung PS51D450 (plasma) Y-Main is compatible?

            Originally posted by dick_barton
            I would have thought that it would be a problem with one of the buffer connections missing. But I'm prepared to live and learn.

            Is it possible to populate one board with parts from the other board?
            It's not possible. also thanks.


            Well, I will try to change the y-main as you mentioned, when I have time.
            Edit: Nothing, rev 1.5 does not work.
            Last edited by samwilson; 04-29-2020, 10:05 AM.

            Comment

            Related Topics

            Collapse

            • porfyriadhs
              Samsung Plasma PS51D6900DS Bootloop
              by porfyriadhs
              Hello . I have a problem with a samsung plasma tv stuck in bootloop . The TV is Samsung PS51D6900DS plasma smart tv .Need help if anyone have any suggestions
              Thanks a lot !!
              10-19-2023, 11:31 AM
            • ArMaaN376
              Samsung PS51E550 Plasma TV
              by ArMaaN376
              Hello,
              I am having Samsung PS51E550 Plasma TV. While the TV was working, a crackling sound heard & video went off with audio still ON. After switching it off & ON, the red LED on TV blinks six times & then off.
              Opened TV cover & observed foll
              a) Green LED on the small PCB blinks at @5-6sec ON & off for 3-4 secs. Red LED on logic board ON
              b)Vs & Va on power supply board raises momentarily to 209v & 58v resp & then drops.
              c) Cold test on Y-main board shows all 3 pins of FGPF4536 IGBT short to Grnd.
              How to confirm Y -Buffer board...
              06-19-2024, 04:05 AM
            • CDNBrewer
              Samsung Plasma PN43D450A2D No Power
              by CDNBrewer
              Hello, I have a Samsung Plasma TV - Model # PN43D450A2D

              This was my parents TV and the initial symptoms were that the display was hard to turn on with the display making various clicking noises until one day it would not turn on anymore.

              I took a look and found a couple 1000uF capacitors (i believe on the low voltage size) that had leaked out their electrolyte and did not test well on a tester. I replaced them but still no dice.

              When the TV is plugged in, there is no clicking, LED status lights (on PCB boards or the front display) and the power on button...
              03-02-2025, 04:59 PM
            • jshhh
              Samsung ps51d550 plasma tv repair help
              by jshhh
              Hi all,

              I have an old Samsung ps51d550 that would power on with no picture. I was testing the voltages on the boards based on some advice I'd seen online, I took off 2 of the boards to try test the mosfets, but couldn't really get at them...I left it a while, came back and reinstalled the boards to do some tests and it started smoking. Looks like it was coming from this ribbon cable (see attached picture).

              As you can see, im an absolute novice with this kind of thing but I don't like paying for repairs or buying new stuff if I can fix it cheaper.

              do you think...
              07-19-2025, 10:18 PM
            • crigab
              Samsung plasma PS43E490
              by crigab
              Hy guys, i have a Samsung plasma PS43E490, with Y-board and X-board defective. I repaired them, but now the problem is that i have sparks on the ribbon cables from the X buffer to the screen when powering up. There is any solution for this? Thanks. ...
              02-02-2024, 08:51 AM
            • Loading...
            • No more items.
            Working...