Samsung PS51D450 (plasma) Y-Main is compatible?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • samwilson
    New Member
    • Mar 2020
    • 4
    • España
    #1

    Samsung PS51D450 (plasma) Y-Main is compatible?

    Good Morning, I recently got this TV, which has a breakdown in y-main. The problem is that I recently got a y-main that supposedly works for my tv. But I'm not sure. Since it has 3 connectors, instead of 4 connectors.Both plates have the same numbering, but they are different revisions, one 1.4 (my tv) and the other 1.5.

    Thanks and sorry for bothering.
    P.D: At shopjimmy it says that you can replace one with the other. But I prefer to make sure.

    The one on the left is the one with the TV and the one on the right is the y-main that has arrived. I have marked the differences, which I have seen.
    Tags: None
    • tvtimmy
      Badcaps Legend
      • Mar 2015
      • 1160
      • usa
      #2
      Re: Samsung PS51D450 (plasma) Y-Main is compatible?

      I had one like that. It will work.

        Comment

        • samwilson
          New Member
          • Mar 2020
          • 4
          • España
          #3
          Re: Samsung PS51D450 (plasma) Y-Main is compatible?

          Originally posted by tvtimmy
          I had one like that. It will work.
          And did not have any problem, that a connector of y-buffer had nothing connected? Also thank you very much.

            Comment

            • tvtimmy
              Badcaps Legend
              • Mar 2015
              • 1160
              • usa
              #4
              Re: Samsung PS51D450 (plasma) Y-Main is compatible?

              It may turn the tv into SD instead of HD but no problems.

                Comment

                • dick_barton
                  Badcaps Legend
                  • Aug 2015
                  • 6642
                  • Wales
                  #5
                  Re: Samsung PS51D450 (plasma) Y-Main is compatible?

                  And did not have any problem, that a connector of y-buffer had nothing connected?
                  I would have thought that it would be a problem with one of the buffer connections missing. But I'm prepared to live and learn.

                  Is it possible to populate one board with parts from the other board?
                  Last edited by dick_barton; 04-29-2020, 06:15 AM.
                  Willing to help but I'm no expert.

                    Comment

                    • samwilson
                      New Member
                      • Mar 2020
                      • 4
                      • España
                      #6
                      Re: Samsung PS51D450 (plasma) Y-Main is compatible?

                      Originally posted by dick_barton
                      I would have thought that it would be a problem with one of the buffer connections missing. But I'm prepared to live and learn.

                      Is it possible to populate one board with parts from the other board?
                      It's not possible. also thanks.


                      Well, I will try to change the y-main as you mentioned, when I have time.
                      Edit: Nothing, rev 1.5 does not work.
                      Last edited by samwilson; 04-29-2020, 10:05 AM.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • porfyriadhs
                          Samsung Plasma PS51D6900DS Bootloop
                          by porfyriadhs
                          Hello . I have a problem with a samsung plasma tv stuck in bootloop . The TV is Samsung PS51D6900DS plasma smart tv .Need help if anyone have any suggestions
                          Thanks a lot !!
                          10-19-2023, 11:31 AM
                        • ArMaaN376
                          Samsung PS51E550 Plasma TV
                          by ArMaaN376
                          Hello,
                          I am having Samsung PS51E550 Plasma TV. While the TV was working, a crackling sound heard & video went off with audio still ON. After switching it off & ON, the red LED on TV blinks six times & then off.
                          Opened TV cover & observed foll
                          a) Green LED on the small PCB blinks at @5-6sec ON & off for 3-4 secs. Red LED on logic board ON
                          b)Vs & Va on power supply board raises momentarily to 209v & 58v resp & then drops.
                          c) Cold test on Y-main board shows all 3 pins of FGPF4536 IGBT short to Grnd.
                          How to confirm Y -Buffer board...
                          06-19-2024, 04:05 AM
                        • CDNBrewer
                          Samsung Plasma PN43D450A2D No Power
                          by CDNBrewer
                          Hello, I have a Samsung Plasma TV - Model # PN43D450A2D

                          This was my parents TV and the initial symptoms were that the display was hard to turn on with the display making various clicking noises until one day it would not turn on anymore.

                          I took a look and found a couple 1000uF capacitors (i believe on the low voltage size) that had leaked out their electrolyte and did not test well on a tester. I replaced them but still no dice.

                          When the TV is plugged in, there is no clicking, LED status lights (on PCB boards or the front display) and the power on button...
                          03-02-2025, 04:59 PM
                        • crigab
                          Samsung plasma PS43E490
                          by crigab
                          Hy guys, i have a Samsung plasma PS43E490, with Y-board and X-board defective. I repaired them, but now the problem is that i have sparks on the ribbon cables from the X buffer to the screen when powering up. There is any solution for this? Thanks. ...
                          02-02-2024, 08:51 AM
                        • lp20th
                          Samsung Plasma TV Power Supply Issue
                          by lp20th
                          I have a vintage 2008 Samsung 50” Plasma TV, Model code PN50A550S1FXZA with a power supply part number BN44-00222A. I repaired the power supply board several years ago finding a couple of cold solder joints on the back side of the board and it's worked great up until now. Recently a fried sound occurred with the smell of burnt electronics and the TV shut down. Trying to turn it back on yielded the typical relay clicking with no TV boot up. Upon investigation, removing feeds to the other boards within the TV it was found that disconnecting the logic board from the power supply allowed the...
                          11-28-2023, 10:28 AM
                        • Loading...
                        • No more items.
                        Working...