Re: when i turn on, Philliips TV is not on
IC951= 6.60v I use ground of C951A
I un solder PC901 now I measure that pads. Still same voltage.
I replace PC902 with 817A optocoupler. Still same voltage.
How can I check if C955,C954 are shorted. Can I lift one pad of cap?
Originally posted by R_J
View Post
I un solder PC901 now I measure that pads. Still same voltage.
I replace PC902 with 817A optocoupler. Still same voltage.
How can I check if C955,C954 are shorted. Can I lift one pad of cap?
Comment