Re: Sony KDL-55EX620, no stand-by volts from one bad resistor?
"On page 35 of the service manual I traced the AC_OFF_DET circuit back to that crispy looking transistor Q6405"
You need to look at the schematic again, that is not what is shown in the service manual I provided. We need to get correct info first.
You need to trace the circuit from the AC_off_det pin cn6101 pin 7 back toward the front end.
"On page 35 of the service manual I traced the AC_OFF_DET circuit back to that crispy looking transistor Q6405"
You need to look at the schematic again, that is not what is shown in the service manual I provided. We need to get correct info first.
You need to trace the circuit from the AC_off_det pin cn6101 pin 7 back toward the front end.
Comment