I tried to add analog RGB inputs to my CRT so I could use my European Amiga and my Atari ST on the same television. I thought I had everything mapped out and just right but when I plugged in the set I heard a crackling and popping sound. Then I smelled burnt components. On the jack board 4 resistors were blown and one cap looked suspicious so I replaced all of those and totally removed the modifications I had made.
Sound input works on the white audio jack but I get nothing through my coaxial antenna input or my composite video input. My OSD still works though and I do get snow over the tuner.
I don't see any other obviously damaged components so I was hoping to get some direction on what may need to be replaced.
I have included the service manual in pdf format.
Thank you in advance.
Sound input works on the white audio jack but I get nothing through my coaxial antenna input or my composite video input. My OSD still works though and I do get snow over the tuner.
I don't see any other obviously damaged components so I was hoping to get some direction on what may need to be replaced.
I have included the service manual in pdf format.
Thank you in advance.
