Samsung PS42C450B1W CLICKING sound.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • micksack
    New Member
    • Jun 2018
    • 6
    • Ireland
    #1

    Samsung PS42C450B1W CLICKING sound.

    I have this tv which once connected to power it clicks and won't display standby light.

    If i isolate the power board it doesnt click anymore. And there doesn't seem anything wrong with the board. Looking for some pointers thanks. Photos included
    Attached Files
    Tags: None
    • Andrew F. Ali
      Badcaps Legend
      • Jan 2014
      • 2450
      • Trinidad & Tobago
      #2
      Re: Samsung PS42C450B1W CLICKING sound.

      OK. The PSU is OK. So what you are saying is that when you disconnect the Y-main Bd. the PSU does not click anymore. You may have a bad Y-main Bd.

        Comment

        • micksack
          New Member
          • Jun 2018
          • 6
          • Ireland
          #3
          Re: Samsung PS42C450B1W CLICKING sound.

          Originally posted by Andrew F. Ali
          OK. The PSU is OK. So what you are saying is that when you disconnect the Y-main Bd. the PSU does not click anymore. You may have a bad Y-main Bd.

          Thanks for your reply. How can I be sure it's a board issue.

            Comment

            • Andrew F. Ali
              Badcaps Legend
              • Jan 2014
              • 2450
              • Trinidad & Tobago
              #4
              Re: Samsung PS42C450B1W CLICKING sound.

              Disconnect the Y-Main from the PSU. Do a diode test across Yfr and Yrr and test the ohms reading from GND and the Vscan test point. Report your findings.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • B0r1s
                  Samsung UE49KS7000SXXH - fast clicking sound in standby mode
                  by B0r1s
                  PSU - BN44-00878A

                  Symptoms:

                  The TV turned itself off, and I haven't been able to turn it back on. The standby voltage was unstable and lower than it should be.
                  A weak clicking sound was coming from the transformer.

                  Video with clicking sound:https://www.youtube.com/watch?v=lAduhjNtqCA

                  Progress:

                  After the transformer, I measured four Schottky diodes. DM862C and DM864C diodes readings were 003 in both directions. After detaching them from the circuit and measuring them, DM864C was the shorted one. These Schottky diodes are SB550.I...
                  01-17-2023, 04:58 PM
                • Document Archive
                  Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-07-2024, 05:50 AM
                • slimmy182
                  [SOLVED] M1 MacBook Pro clicking sound logic board 5V no power on A2338 820-02020
                  by slimmy182
                  Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).

                  I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).

                  Looking on google I found this:...
                  01-14-2023, 11:55 AM
                • jchang
                  Samsung UN70NU6900F no picture and no sound
                  by jchang
                  Hi all

                  I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.



                  Symptom:
                  No picture no sound.
                  When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
                  No sound at all.



                  What I tried:
                  1. I tried unplugging the left or right ribbon...
                  01-09-2023, 06:28 PM
                • Ierwin
                  Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
                  by Ierwin
                  Hello everyone,
                  Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
                  The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
                  He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
                  I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
                  Anyway I still fully expect that there has been something seriously damaged...
                  05-13-2025, 03:31 PM
                • Loading...
                • No more items.
                Working...