I have gotten my hands on my first OLED TV, cracked screen sadly. There is oh so very tiny crack in the upper right corner, barely visible. If I am correct, once the OLED screen cracks, it will not self-illuminate at all, correct me if I am wrong.
I am trying to figure out if the TVs parts are salvageable. When I turn the TV on, I hear a relay click, ~2 seconds later it clicks out. I do not get any blink error codes. I don't know if that is normal operation of the OLED TVs when they are clacked, of if there is an inherent issue.
PSU is showing good stand by voltage, I even get PSU_ON from main for that short time it is "on". The 12V and 24V are there as well for that time.
The DRV-ON circuit however is not on (0V), and the 24V pins on the bottom of the board, leading to the T-Con, are also at 0V.
Any insight would be appreciated. Thanks.
I am trying to figure out if the TVs parts are salvageable. When I turn the TV on, I hear a relay click, ~2 seconds later it clicks out. I do not get any blink error codes. I don't know if that is normal operation of the OLED TVs when they are clacked, of if there is an inherent issue.
PSU is showing good stand by voltage, I even get PSU_ON from main for that short time it is "on". The 12V and 24V are there as well for that time.
The DRV-ON circuit however is not on (0V), and the 24V pins on the bottom of the board, leading to the T-Con, are also at 0V.
Any insight would be appreciated. Thanks.
Comment