EEPROM Programmer

[CraigR]

Re: EEPROM Programmer

Not struggling yet. Just ordered the programmer above and never did a chip before. I need to know where to get the bin files then maybe a step by step with the software. I'm not a n00b to TV repair. I always just bought the pre-programmed chips but thought I could save a bit of time and money especially time because everyone wants the TV fixed TODAY! and do not realize parts need to get ordered sometimes. Years ago I messed with re-programming satellite cards so not exactly new with programming either. If we can get some pro's to chime in maybe this can be a sticky instructional thread?? I would also be willing to pay for private help if necessary. I also hope to lean how to reprogram a bios in a laptop as some I get are locked. I work for Midwest Electronics Recycling and am in charge of repairing what can be repaired and re-sold.

[diif]

Re: EEPROM Programmer

Anybody want to help me learn?

What are you struggling with ? Forget using the clip, they are rubbish.

[CraigR]

Re: EEPROM Programmer

Anybody want to help me learn?

[Davi.p]

Re: EEPROM Programmer

Hi, i have modified the ch341 to allow for 5v serial eeproms, it works, then i have bought the RT809F that claims to help programming some MCU and some programmable Gamma ref. voltage that i need to reprogram on two TVs, it's on travel, now i miss a programmer for the parallel flash memories..

[CraigR]

Re: EEPROM Programmer

Here is what I just ordered so I hope it does the trick. I assume you have done this? Anyway I could talk you into holding my hand on getting started? Or I could send you some cash even???
https://www.ebay.com/itm/RT809F-Set-...53.m2749.l2649

[dick_barton]

Re: EEPROM Programmer

Here's what lots of people have used.

https://www.ebay.co.uk/itm/CH341A-24...-/152069847771

[CraigR]

Does anybody use an EEPROM programmer for TVs? I'm seeing more TVs with EEPROMS messed up and wanted to get my own programmer and do it. Please chime in if you have any advise.