Vestel 17mbxx console mode

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jellytot
    Member
    • Mar 2015
    • 42
    • Ireland
    #1

    Vestel 17mbxx console mode

    Hi. Does anyone know how to stop the reboot cycle when you run "crash_the_system" command in terminal mode of the vestel 17mb series
    mainboards to get into the conf and vendor Dirs? I'm obviously missing something simple I tried the WATCHDOG 1 command but nothing
    seems to happen..any help on this is most appreciated..
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • France_53
      Vestel tv, how to flip the image?
      by France_53
      Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing...
      05-12-2024, 05:22 AM
    • gabri2211
      Xbox Series X Console Won't Turn On - Broken Nexus Connector on Mainboard
      by gabri2211
      Hello everyone,
      Inside the console there is a small circuit board (see photo) that contains the main power switch, the one on the front.
      This circuit board connects to a 10-pin flat cable called NEXUS that terminates on the motherboard.
      This NEXUS connector broke.

      Can anyone tell me, while waiting for a replacement, if it's possible to turn on the Xbox by disconnecting this circuit board and making some modifications (like adding a small power button) on the motherboard?

      The Xbox has a power supply that provides 12 volts on all outputs, so the power...
      07-28-2025, 07:13 PM
    • FlailingEngineer
      Help with Bush Tv (Vestel 17mb95m Mainboard)
      by FlailingEngineer
      Hi, I was recently given a Bush Smart TV by a friend and the main board seems to be hanging on by a thread.

      Before we get to that, my first obstacle was figuring out the model number since the back sticker has gone for a walk. Upon taking off the back case, I noticed the following Vestel parts, 17MB95m mainboard, 17IPS71 (what I'd assume is power supply) and a VES420UNVL-3D-S02 display panel. After doing some research I think the TV I have is a Bush ELED42240FHDCNTD3D, based on the matching image here (https://www.manualslib.com/manual/11...td3d.html#manu...
      05-31-2023, 06:52 AM
    • massimomax
      Firmware TV Hitachi 32HE4500 scheda madre Vestel 17MB211S matrice: VES315UNVL-2D-N11
      by massimomax
      Chiedo aiuto per problema a TV Hitachi 32HE4500 che non si accende più,ho bisogno del firmware della scheda madre vestel 17MB211S codice pannello VES315UNVL-2D-N11 ?
      spero che qualcuno può averlo per riprogrammare eprom. grazie

      Post in English !!!

      I ask for help with a problem with a Hitachi 32HE4500 TV that no longer turns on, do I need the firmware for the Vestel 17MB211S motherboard, panel code VES315UNVL-2D-N11? I hope someone can have it to reprogram eprom. Thank you


      ​
      02-28-2025, 07:27 AM
    • Adenitz
      Troubleshooting Vestel TV, has standby, but cannot turn ON
      by Adenitz
      Hello,
      I need advice in troubleshooting Telefunken TV (it is actually Vestel). There is red Standby light but TV cannot be turned on either by remote control (which is good and tested on another TV) or by actual on/off switch at the back of the TV.
      Power board is Vestel 17IPS71 and I'm not sure about the mainboard, it seems like 17MB82S
      Both boards are shown in the attached photos.

      What is normally first that is checked in this case. I have removed power board, make sure it has no dangerous voltage on the big caps and check many components (transistors and diodes)...
      12-27-2023, 03:43 AM
    • Loading...
    • No more items.
    Working...