need Vestel 17MB35-4 Boot file bin

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rawan
    Senior Member
    • Oct 2009
    • 57
    #1

    need Vestel 17MB35-4 Boot file bin

    Hi
    I have Moser Baer tv , chassis 17MB35 , MCU is MST6WA7GQ

    Tv some times work ok , somethimes front led blinking problem,

    I change all caps in power supply, i run tv with power supply and inverter by applying power on signal and backlight voltage to smps ,without motherboard,
    tv runs ok but with Main board tv sometimes works or front led flashing,

    even i did spi flash program but still same problem, i heard that i need boot bin file comes with some other files load in usb and with usb insert in tv problem can be solved,
    Please upload these files if some one have,
    Thanks
    Mac
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Grut
      JVC LT-39CA120 - Vestel 17MB171 - Android boot loop
      by Grut
      Hi everyone,

      My JVC (Vestel) LED TV is stuck on a Android boot loop when I switch the power on.

      Previously, I was trying to clean the storage memory (by deleting as many files as possible), I may have delete some start-up Android files.....so I screw it.🤡

      When I switch the power on, the initial JVC is shown. I have tried to run Android 9 from a bootable USB on the TV. It starts reading the USB but nothing happens and the JVC logo and Android boot loop keeps the same.

      Can anybody help me please finding the 17MB171 USB firmware to try to upload...
      11-15-2024, 03:12 AM
    • privato89
      Nintendo Switch Oled HEG-001: Second-Stage Boot Failure
      by privato89
      Hello everyone,

      I'm facing an issue with a HEG-001 motherboard that is unable to complete the Second-Stage Boot. I'd like to start directly with my conclusion, which is the decision to replace the MAX77621AEWI chip, and understand if it could be a correct evaluation.

      Before I dive into the process that led me to this decision, I want to mention that I have a fully equipped lab where I can perform any kind of tests.

      Let's begin:

      Following some guides online, I tried to understand how the Boot phase of the Nintendo Switch works, and what are the...
      03-26-2024, 06:37 AM
    • eltano4i20
      [HELP] SAMSUNG NP270E4E-K01AR
      by eltano4i20
      1) Error trying to enter the BIOS
      --> [F2] won't let me enter the BIOS. To enter the BIOS, I had to create a shortcut and then type C:\Windows\System32\shutdown.exe /r /fw /t 1 in the destination. This forced it to restart and enter the BIOS.
      Once inside, I went to the BOOT menu, but, surprise, it wasn't there. I got the following message:

      BOOT PRIORITY ORDER (img-05)
      1- Windows Boot Manager
      2- SATA HDD
      3- NETWORK
      4- Debian

      2) Error trying to access the BOOT MENU
      --> I restarted the notebook and pressed [F10] but the BOOT...
      07-04-2025, 12:39 AM
    • Forest79
      Lenovo ThinkStation P520 BIOS file needed
      by Forest79
      Hello,

      I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
      The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.

      However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)...
      07-23-2023, 07:39 AM
    • hinisa
      Xiaomi router freezes at boot after re-capping
      by hinisa
      I'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.

      When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.

      After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:



      Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...
      07-08-2023, 05:58 AM
    • Loading...
    • No more items.
    Working...