Hello all,
I picked up this tv for free and am trying to repair it. I've replaced the SS board and have the A board on order after receiving the wrong one. I checked continuity of the SN board by unplugging the p board connection and placing one probe on the chassis and one on the Vsus in lead and got a Beep (continuity) when I check the continuity of the new SS board when installed it shows rising resistance (assuming caps charging). I checked the Fets and diodes on the sn board while in circuit some were continuitous some were not (no beep) when I plug it in the led is solid and nothing happens. The second relay turns on when I push power. I have to hold power off then press power on again really quick to get to the 14 blinks.
Any help would be appreciated. I've researched through other threads and none have solved my problems.
I picked up this tv for free and am trying to repair it. I've replaced the SS board and have the A board on order after receiving the wrong one. I checked continuity of the SN board by unplugging the p board connection and placing one probe on the chassis and one on the Vsus in lead and got a Beep (continuity) when I check the continuity of the new SS board when installed it shows rising resistance (assuming caps charging). I checked the Fets and diodes on the sn board while in circuit some were continuitous some were not (no beep) when I plug it in the led is solid and nothing happens. The second relay turns on when I push power. I have to hold power off then press power on again really quick to get to the 14 blinks.
Any help would be appreciated. I've researched through other threads and none have solved my problems.
Comment