I have a Samsung HT-Z220 after switch on it fails into protect mode,
Can someone has any idea pls ??
Can someone has any idea pls ??
-
-
Re: Samsnung DVD PLAYER
It would be best to get some pictures up of the insides. -
Re: Samsnung DVD PLAYER
schematics and user manual links
https://www.electronica-pt.com/esque...ht-z220-18695/
Comment
-
Re: Samsnung DVD PLAYER
attached some photos
ThanksAttached FilesComment
-
-
This specification for the Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Switch V 10 SW5-017P boardview and Switch V 10 SW5-017P schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-06-2024, 05:30 AM
-
I have a UE40F7000 Samsung which occasionally fails to properly come out of standby. The relay clicks and the backlight flashes but then goes off again with a click, and repeats. I think its temperature related as leaving it overnight seems to allow it to switch on OK.
I assume its PSU related and had a look - it's a BN44-00632B. No signs of swollen caps or hot components.
I saw a great YouTube video on a possible PFC related issues and an underrated resistor https://youtu.be/DREofE4WIvg?feature=shared though a quick trace from the SPC7011F pin 7 lead me to a resistor... -
Great to be here! I'm a newbie here trying to find a "micro", momentary push switch to repair a Sony "clamshell" video walkman. This micro switch has long since discontinued by Sony, however I hope there are third-party switches of the same size and functionality that I might be able to source to play the same role. The purpose of this switch is to tell the video walkman that the user has activated the mechanical tape eject button, turning that physical action into an electronic signal that tells the tape transport mechanism to open so one can load or eject a video tape. I... -
Hello,
I've been working on a NEC TurboExpress and I accidentally got the plastic inside the power ON/OFF switch too hot while doing other repairs and melted it. At first, it would still power on when sliding the switch, but you had to really press inward while sliding to get it to work.
I removed the switch component and tried to gently melt the plastic back so it would work more reliably and all I managed to do was make it worse.
I need to find a replacement On/OFF switch for this, but having some trouble figuring out which kind of switch I need.... -
Hello everyone.
Got a catalyst 2960 from the usual scrapyard - ebay.
It is stuck in bootloop and the power supply is missing the 3.3v rail. (+12V, -53V, +3.3V)
Some green moisture crystallization on mainboard, which cleared very well with IPA and visually there is nothing rusted or gone.
Still working on the PSU to get the 3.3v rail back (waiting for parts), but for now I'm using an external buck converter board hooked up to the 12V rail ( by the way, the switch seems to be working with only 12V ).
The switch fails to boot due to the following POST error:...
Comment