Set had some vertical green and white lines reported by previous owner..when I checked they were not in any kind of pattern, but there were about 15 of them at various intervals on the screen..I have previously had a 52 inch version exhibit similar performance and it wound up being a faulty T-con.
When I opened it up, there is a sheen like a silicone spray sheen on the ICs on the T-con..I found silicone gel on some pads on the back side of the T-con...Is it possible that the board or a chip got hot enough to vaporize the gel to a point where it traveled to the front side of the board?
When I opened it up, there is a sheen like a silicone spray sheen on the ICs on the T-con..I found silicone gel on some pads on the back side of the T-con...Is it possible that the board or a chip got hot enough to vaporize the gel to a point where it traveled to the front side of the board?
Attached Files
Comment