Samsung FP-T5084

[cliff_hootarski]

Re: Samsung FP-T5084

Can we get a picture of the bottom connections of the power supply board? (with it still connected)

[cliff_hootarski]

Re: Samsung FP-T5084

On CN801 the PS_ON pin, do you get a voltage change on that pin when the power button is pressed? Voltage measurement before and after, please post results.

[Jtroutt19]

Re: Samsung FP-T5084

Voltage at ps_on is 3.06v no change after hitting power button. The button is a touch button too. I alos figured i would give you the V on stby as well which is 3.56v.

Pictures of the connectors are also included. Just the ones at the bottom closest to the main board.

[cliff_hootarski]

Re: Samsung FP-T5084

How about a picture of the control board? Maybe we can get test patterns.

[ReeceyBurger123]

Re: Samsung FP-T5084

How about a picture of the control board? Maybe we can get test patterns.

Vs/Ps on is fine so why run that ?

[ReeceyBurger123]

Re: Samsung FP-T5084

The Psu is still faulty, sounds like its been "played" with maybe just replace it if your not too confident diagnosing it.

[cliff_hootarski]

Re: Samsung FP-T5084

Didn't see the Vs on was there.

[Jtroutt19]

Re: Samsung FP-T5084

I am comfortable with diagnosing it. Just need a bit of guidance. The other thought here is the service manual says to replace the main board if there is power at the stby pinc.