samsung ps50b451 red light and clicking

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • paddyboy
    New Member
    • Apr 2015
    • 3
    • scotland
    #1

    samsung ps50b451 red light and clicking

    hi any help I have a plasma model number ps50b451/b2wxxu.
    I have a flasing red light and a high clicking noise.
    had a look at the psu and all the caps seem fine any help be appreciated.

    thjanks.
    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: samsung ps50b451 red light and clicking

      Disconnect the X (right hand side pcb) and Y (left hand side pcb) sustain boards one at a time and see if clicking either goes or stays. Common issue with this set is shorted sustain boards not an easy fix.
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Document Archive
          Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
          09-07-2024, 05:50 AM
        • Kaar3l
          Samsung QLED QE65Q7FNAT only standby light
          by Kaar3l
          TV: Samsung QLED QE65Q7FNAT
          PSU: BN4400940A
          MB: BN94-12832K

          I got the tv in spring 2024. At that time it started, then ran 60 sec and poweroff. Seemed like reboot issue. I didn't have time and room to check it in summer so I plugged it in and now the standby light is on. I press button on remote, standby light goes off and tries to start?. No picture or backlight on LCD. I thought about removing diodes like in this thread: https://www.badcaps.net/forum/troubl...sung-qled-q60r...
          09-24-2024, 01:35 PM
        • marcinq
          Samsung UE60KS7000 No Standby Light
          by marcinq
          Hello,

          I've got a problem with a Samsung UE60KS7000 that was given to me and said that there was a problem with the One Connect box but as I understand the TV should turn on even with the One Connect box disconnected (which it doesn't). There is no stand by light.

          I've disconnected the Main Board from the PSU and when connecting to mains the backlight turns on which suggests the PSU might be ok. I've measured the voltages out of the PSU and they seem reasonable (like the labels say). The main board has no obvious burns, there are no shorts on the power rails anywhere....
          4 Photos
          05-26-2025, 11:36 AM
        • DXseekerMO
          Samsung UN65NU6900FXZA Stand-by light on but voltages on PS indicate TV should be on
          by DXseekerMO
          Hello everyone!

          Tonight I picked up a Samsung UN65NU6900FXZA with a curious issue.

          Symptoms:

          1) Plug TV in to AC outlet, stand-by light illuminates briefly and goes out.
          2) TV does not appear to turn on
          3) Backlights do not illuminate, voltages associated with backlights on Power Supply are not present
          4) "Power on" terminal on Power Supply has 3.26v
          5) "A13V" terminals have 12.9v
          6) Stand-by test jumper on Power Supply has 12.9V
          7) Optical audio jack on Main Board illuminates
          8) With stand-by...
          06-09-2021, 12:19 AM
        • Document Archive
          Samsung Galaxy Book Ion NP930XCJ Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the Samsung Galaxy Book Ion NP930XCJ Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the NP930XCJ boardview and NP930XCJ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
          09-06-2024, 11:40 PM
        • Loading...
        • No more items.
        Working...