RT809F programmer

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dycc
    Vision
    • Nov 2011
    • 625
    • Côte d'Ivoire
    #1

    RT809F programmer

    HELLO
    Someone here has already use RT809F programmer to troubleshoot a TV??
    It can read & write firmware either through VGA/HDMI or serial NOR flash (in common SOIC8 or SOIC16 packages) directly through its ZIF socket.
    I use it for computer and laptop repair and it is a very good programmer but , don't have any experience using it in monitor or TV repair.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • joelz
      pin Setting parameter line or set lines menu for adding ITE5571e on RT809F programmer
      by joelz
      Hi, sorry if i here to request if anyone know number of pin to set lines for reading ITE7751e on RT809F..i try to see on schematic but i dont know how to choose it..pleasee..
      11-18-2024, 06:02 AM
    • STKR123
      The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
      by STKR123
      Greetings badcaps community,

      I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
      So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

      Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

      I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

      These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

      I learned that desoldering...
      10-29-2024, 06:03 AM
    • Teeheeze
      RT809H Programmer Firmware Corrupted
      by Teeheeze
      This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone...
      02-13-2025, 04:51 PM
    • araxnido
      Programming KBC IT8987VG ASUS TUF FX506L RT809F+PEB
      by araxnido
      Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.

      When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which...
      06-10-2025, 09:26 PM
    • H34TO
      ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap
      by H34TO
      Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
      06-17-2025, 07:17 AM
    • Loading...
    • No more items.
    Working...