power supply DELTA mod.: DPS-168 BP schematic diagram

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ANDRASONI LUCIAN
    Senior Member
    • May 2012
    • 56
    • Romania
    #1

    power supply DELTA mod.: DPS-168 BP schematic diagram

    Hi friends!Looking schematic of this power supply, I have some SMD pretty "roasted".This SMPS is for TV Philips 37PFL3312/10 LCD . Thank you in advance!
    DELTA ELECTRONICS Power supply DPS 168-BP
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      ORIGINAL POWER SUPPLY BOARD
      7 Photos
      11-22-2024, 01:46 PM
    • sam_sam_sam
      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
      by sam_sam_sam
      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
      03-31-2024, 02:12 PM
    • sam_sam_sam
      Modification to a ZD-987 desoldering/soldering station using a external switching power supply
      by sam_sam_sam
      I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

      I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
      07-01-2024, 06:34 AM
    • dragon3x
      >>> Troubleshooting Delta Power MAX 500ATX ATX power supply
      by dragon3x
      Hi, this is for troubleshooting and, hopefully, repairing a Delta Power psu
      that is still quite new, as it worked OK for some months until it failed.
      At the time I was not into power supply electronics; it was put
      aside and a new power supply installed inside the computer. Also at the time
      power supplies were half the price of today's.

      On the PCB there are a D339 and 7500B chips.

      I have found that schematics with these 2 chips (see included file).
      Does it represent the actual circuit of the MAX-500ATX, I cannot tell.

      Some measurements,...
      06-05-2024, 03:34 PM
    • JimBanville
      Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
      by JimBanville
      The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
      Opened it up and discovered the power supply is making a faint clicking or ticking sound.
      I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
      I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
      09-13-2023, 07:21 AM
    • Loading...
    • No more items.
    Working...