Samsung 460mx-3 will not start
main board is bn9404046a
Power is BN44-00310A
all voltages are fine except for the PS, which is 0.79 V
I need a service manual for the PSU and the value of the resistor R008 to the inverter ss1460-12a01 rev. (I tried to turn on the inverter bringing together the SB and BL.ON across the resistor and make the connection and so we hurt resistor R008 even though the device was turned off)
I tried to connect the SB and PS across the resistor and the relay is switched on is not excluded
I wonder if the detector voltage 5V (lamp error comes from the main board or the inverter)?
I suspect that by the main board
Thanks in advance.
main board is bn9404046a
Power is BN44-00310A
all voltages are fine except for the PS, which is 0.79 V
I need a service manual for the PSU and the value of the resistor R008 to the inverter ss1460-12a01 rev. (I tried to turn on the inverter bringing together the SB and BL.ON across the resistor and make the connection and so we hurt resistor R008 even though the device was turned off)
I tried to connect the SB and PS across the resistor and the relay is switched on is not excluded
I wonder if the detector voltage 5V (lamp error comes from the main board or the inverter)?
I suspect that by the main board
Thanks in advance.
Comment