Samsung pn42b430 - Sound w/o video

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jpurdy647
    New Member
    • Jun 2015
    • 6
    • United States

    #1

    Samsung pn42b430 - Sound w/o video

    Hello, I have a Plasma TV I aquired for free and am not positive how to diagnose this. I checked all the fuses for continuity and they were good. No capacitors look bad.

    When I turn the TV on, I get the power on sound, but the screen never updates, it remains the same grayish color as when it is turned off. I looked close to see if maybe the backlight was out, but it still did not look like it was displaying.

    I watched a video and it suggested maybe the Y Sustain, or the logic board.

    How would I go about confirming which board has failed, and if possible, which component?
    Attached Files
  • Hamie
    Badcaps Legend
    • Apr 2014
    • 1383
    • UK

    #2
    Re: Samsung pn42b430 - Sound w/o video

    Check the vsc test point on the ysus.
    Going from experience it will almost certainly be the ysus on this set, common failure.
    There are repair kits available for the ysus, should fix your problem. You might not need all the parts in the kit.

    Comment

    Related Topics

    Collapse

    • gl4709
      Samsung un55cu7000d with backlight and sound No Video / Picture
      by gl4709
      I am working on a Samsung un55cu7000d which has backlights and audio. There is no picture. This model does NOT have a separate TCON board. Before I order a main board I would like to try and confirm that the issue is not in the display. The ribbon cable from the main board goes directly to the display and I can then disconnect the left from the right. When I disconnect the right side the display lights up on one side but has no video being displayed. Can you all give me some guidance on how to confirm the main board is the issue.
      01-23-2025, 06:21 PM
    • Max514
      Samsung UN55H8000 sound but no backlight no video
      by Max514
      Hi all,

      Ok so I have this beautiful un55h8000 samsung tv with sound but no video nor backlight. When turning the set on the red light blinks 5 times.

      The screen shows no damage and backlight turns on when I disconnect the power supply from the main board. The tcon board only has 2 out of 3 leds on.

      I came across this page and followed the different steps: https://techhometravel.com/samsung-u...ight-no-video/
      • Unplugging the main board cable at the power supply >>> backlights came on.
      • BLU_ON signal from the
      ...
      04-14-2022, 10:34 AM
    • Document Archive
      Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
      09-07-2024, 05:50 AM
    • soeren
      A2442 - No sound over internal speakers and no video playback
      by soeren
      I am facing a strange issue, I don't have any sound over my internal MacBook speakers and also the video won't start. If I change to my head speaker or via HDMI (speaker on my external Display) the sound works over the head speaker or Display and also the video starts (ex. youtube).

      All happened after the battery ran out of power overall several days when I was on vacation.

      I tried to remove the battery and then reconnected the battery, and then the MacBook Pro 14 2021 won't accept any power from my power socket. Then I removed one speaker, connected again the battery...
      07-26-2024, 01:24 AM
    • JRade
      Audio video receiver KENWood KR-V990D,no sound
      by JRade
      When I select the FM receiver, I find a radio station, the sound is heard on REC OUT(L,R), REC TAPE1(L,R),REC TAPE2(L,R) on high-ohm headphones, the sound regulation does not work.
      The output reacts when I connect the record player to PRE OUT FRONT L, the sound is heard in the speaker but the sound regulation does not work. Then it does not matter what I chose on the front selector.
      I replaced the capacitor C303/0.047F, nothing changes.
      I'm asking for help, what should I do next?
      Thanks in advance!...
      08-05-2025, 10:23 PM
    • Loading...
    • No more items.
    Working...