Samsung LN46A630M1F/XZA T-CON

[ibgm]

I'm wondering if anyone has a schematic for the T-Con board on this set. I grabbed it at the local dump and I'm trying to get it fixed on the cheap. Pretty sure the Gamma chip is shot. I messed up one of the 48 legs on the board removing it and would like to see if there is anyway I can bridge it to wherever it's supposed to go. Appreciate any and all help!
This is the common fault on this set, I see the replacement Gamma chip for $15 on numerous websites.

[tom66]

Re: Samsung LN46A630M1F/XZA T-CON

Maybe, but how on earth are we going to tell you if we don't know WHICH pin you messed up?
How about a picture?

[ibgm]

Re: Samsung LN46A630M1F/XZA T-CON

I can get a picture tomorrow, I left the board at work. I just figured if I had the schematic, I would be able to figure it out myself!

[tom66]

Re: Samsung LN46A630M1F/XZA T-CON

Unfortunately Samsung don't publish any schematics for their T-con boards.

[ibgm]

Re: Samsung LN46A630M1F/XZA T-CON

That figures. The set didn't cost me anything, I might just buy the chip and give it a shot anyway. I scraped the board where the solder pad came up and there's a little copper, maybe enough to bite.... For $15 I won't cry that much if it doesn't work! So far the set has cost me $0.00.