Panasonic TC-P50C1 50-inch y main?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mcross
    Badcaps Veteran
    • Sep 2011
    • 201
    • USA
    #1

    Panasonic TC-P50C1 50-inch y main?

    I have a Panasonic VIERA C1 Series TC-P50C1 50-inch . working fine then one day it just shows top 4''s or so, rest total dark., Voltages all within spec's. tried all the norm, ribbons, cleaned ect,,,
    Will post pic;s soon.
    Mike
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • stecos
      Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
      by stecos
      Hi everyone!
      I happened several times, in the search for help from the web, to consult this very interesting forum.
      So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

      Having said that I come to the gist of my post on the forum as the title suggests.
      For my passion for technology I'm now collecting several...
      11-28-2022, 11:39 AM
    • David Smedley
      Panasonic FZ-55 Toughbook main board schematic request
      by David Smedley
      I've been working on this awful project with a Panasonic FZ-55, basically I'm trying to intercept the eDP signal from the main board, and replace it with my own eDP signal connected from an lcd driver. The problem is, for some reason the 30 pin ribbon pinout is really unusual and not playing nice with my LCD controller. Long story short, I managed to fuck up my board and pull off some pads on the eDP out port, I'm hoping to find either another eDP out source somewhere else on the laptop, or figure out this goddamn pin layout so I can just replace the whole native display complex with my controller...
      09-04-2024, 02:57 PM
    • dgnisbet
      Panasonic Tx-P50G20B faulty main board
      by dgnisbet
      I have a Panasonic viera plasma Tx-P50G20B which has a faulty main board. The picture freezes after about 30s and appears to lose vertical hold before finally going black. The main board part number - TNPH0838 (1) A - is common to several Panasonic tvs across a number of ranges however there is a second part number (TXN/A1LTUB for the 50") which is unique to each model.
      My question is, given that the TX-P50G20B 50" differs from the TX-P46G20B 46" only in the physical size of the screen, is it possible to use the main board from the TX-P46G20B in a 50"? The secondary...
      02-03-2022, 02:01 PM
    • cheeky2
      Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
      by cheeky2
      I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
      Obviously the same LVDS connector for the screen connection...
      05-25-2024, 03:27 AM
    • Dani_2024
      Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
      by Dani_2024
      Hi and thanks in advance for any input you might provide!
      I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
      Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

      Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
      5 Photos
      10-28-2024, 05:06 PM
    • Loading...
    • No more items.
    Working...