Help Troubleshooting Toshiba 32AV502R power supply

[budm]

Re: Help Troubleshooting Toshiba 32AV502R power supply

https://www.badcaps.net/forum/attach...7&d=1407027837
Cathode WHITE bar up.
BTW, that section is for 12V/24V power supply.

[akajester]

Re: Help Troubleshooting Toshiba 32AV502R power supply

Thanks. I saw that. Unfortunately I messed up the board. Any suggestions on how to fix it? Thanks.

[budm]

Re: Help Troubleshooting Toshiba 32AV502R power supply

If you know what that diode is, you can use the through hole version and solder the legs to other pads that are not damaged.

[akajester]

Re: Help Troubleshooting Toshiba 32AV502R power supply

It looks identical to d200. Is it possible it's the same? I can't tell what it's supposed to all connect to because the board is burned now.

[budm]

Re: Help Troubleshooting Toshiba 32AV502R power supply

I will have to see if I have the diagram for this board.

[akajester]

Re: Help Troubleshooting Toshiba 32AV502R power supply

Ok well I completely butchered this board. I found one on Ebay for $45, so I bit the bullet and I ordered it. I'm hopeful this will fix the set. I'm bummed I couldn't repair it myself, but that's the way it is. Thank you so much budm and everyone else for your help.

[kramttocs]

Re: Help Troubleshooting Toshiba 32AV502R power supply

I replace it with 1N4148 through hole, just bend the legs.

May be a stupid question but what hole? I've got the board out and need to perform the same fix but am new to electronics this small.