Panasonic Plasma TV TH-42PX700B flickering screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • safesurfer65
    Senior Member
    • Feb 2014
    • 112
    • Scotland
    #1

    Panasonic Plasma TV TH-42PX700B flickering screen

    A friend sent me a video clip of his TV with a flickering screen issue . Anyone got any idea what could be causing this ? Its a Panasonic Plasma TV TH-42PX700B. See link below.

    Thanks

    http://www.laptop-repairs-aberdeen.com/fault.mov
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Panasonic Plasma TV TH-42PX700B flickering screen

      I had this issue before on a 37" PV500B and I never got around to fixing it but suspect it was a D board issue.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • safesurfer65
          Senior Member
          • Feb 2014
          • 112
          • Scotland
          #3
          Re: Panasonic Plasma TV TH-42PX700B flickering screen

          Thanks Tom.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Alicat
              Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
              by Alicat
              Hello,

              Stopped by this site trying to fix my parents Panasonic Plasma TV.

              Model number is TH-50PZ85U

              Power comes on and the red power light stays on solid.

              Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

              I also hear a few clicks.

              I also think my parents said there was a thunderstorm and the TV failed after that.

              Section 6 in the service manual talks about power and no screen,...
              10-30-2024, 10:09 AM
            • Zelek11
              Panasonic Plasma screen interference on left half of screen
              by Zelek11
              My Panasonic Plasma model P55VT50 has started displaying "interference" on just the left half of the screen only (left when facing the screen). Sometimes it's concentrated in about the first 30 seconds after startup, then disappears. Other times it's fine at startup and then randomly does it later on. When it flashes the interference it's very quick and doesn't stay on the screen unless it flashes repeatedly in a row.



              This image is a screen shot from a video I took. This is an example of the interference at its worst. Often the interference is much smaller...
              10-14-2022, 04:54 PM
            • wizard13
              Dynabook Satellite Pro C50D-B-100 - BIOS Issue, Black Screen
              by wizard13
              Hello everyone,

              I am experiencing a BIOS-related issue with my Dynabook Satellite Pro C50D-B-100. When I power on the laptop, the screen stays black, and there is no response from the system. I suspect a corrupted BIOS.

              I have checked the forum and the available documentation but could not find a solution specific to my issue.
              • Brand & Model: Dynabook Satellite Pro C50D-B-100
              • Part Number (P/N): PYU13E-00C00PFR
              • Serial Number (S/N): 22028896H
              • System Configuration (SC): A1PYU13E1127
              • Motherboard Model: IP3_ACN16_MB_V21_20211222A
              • Power Input: DC 19V –
              ...
              02-28-2025, 02:43 AM
            • renech
              panasonic TH-42PC77U plasma television half screen problem
              by renech
              hello,
              I hope someone on this forum can assist me.
              I have a panasonic TH-42PC77U plasma television.
              the lower 1/2 of the screen has become flaky....in and out, then finally goes black and you can only see the top portion.
              i have performed the reset to default settings quite a few times. Panasonic recommended..did not believe this would help...it didn't.
              I have removed the back panel and looked around for something obvious...burn marks in a board, etc....nothing obvious...
              I have read some posts that suggest the problem is related to the boards on the left...
              12-12-2022, 06:53 PM
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • Loading...
            • No more items.
            Working...