Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

LED TV Samsung The Frame 55 inch QE55LS03RAU Standby Light only

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • ChristianBr01
    Member
    • Apr 2025
    • 29
    • Germany
    #41
    Hello everyone,
    The repair isn't finished yet and I'm still working on it, but unfortunately, we had a minor flood due to heavy rain.
    So I have no choice but to wait to continue the work until the damage to the house has been repaired and I have everything back in my small workshop.
    I'll continue as soon as I can.​

      Comment

      • Davi.p
        Hobbist Tech
        • Sep 2009
        • 4817
        • Italy - Milan
        #42
        damned climate changements, stop using air conditioners folks, please.. 😭
        Last edited by Davi.p; 06-02-2025, 09:05 AM.

          Comment

          Previous 1 2 3 template Next

          Related Topics

          Collapse
          • KYBOSH
            Trying to Save - Samsung 65" The Frame (QN65LS03B) with no signs of life (One Connect Box)
            by KYBOSH
            I picked this one up today.
            Previous owner says no signs of life.
            TV looks immaculate and its a 2022 model year so I thought maybe the one connect cable was damaged.
            Got it home and put it on the Kill-A-Watt power meter and it was completely dead.

            The TV model is QN65LS03BAFXZA - version: CB06
            The One Connect Box BN44-01066D / BN96-54788Q / BN39-02470A.

            I immediately remembered EazyBone's Samsung The Frame TV no power....One Connect thread and am preparing myself to tear the One Connect open and hunt for dead parts.

            Will keep you all...
            04-05-2025, 08:32 PM
          • Kaar3l
            Samsung QLED QE65Q7FNAT only standby light
            by Kaar3l
            TV: Samsung QLED QE65Q7FNAT
            PSU: BN4400940A
            MB: BN94-12832K

            I got the tv in spring 2024. At that time it started, then ran 60 sec and poweroff. Seemed like reboot issue. I didn't have time and room to check it in summer so I plugged it in and now the standby light is on. I press button on remote, standby light goes off and tries to start?. No picture or backlight on LCD. I thought about removing diodes like in this thread: https://www.badcaps.net/forum/troubl...sung-qled-q60r...
            09-24-2024, 01:35 PM
          • alro7779
            Samsung UN70TU7000FXZX A two-times flashing standby light loop with no image.
            by alro7779
            Hello, everyone!

            A friend of mine gave me a 70" Samsung TV that does not show image after pressing the power button... It's in a loop with the standby red light flashing two times while the TV tries to power on with a startup sound. You see, it occurs to me that I could try keep learning how to repair TVs out of this device, so I'll share some pics I took after taking the back cover out; I noticed that someone tried to repair it (or did it at some point) because I found a small power supply glued on the metal cover by the mainboard (3.3v IN and 13v OUT). The idea here is checking...
            04-03-2026, 01:26 PM
          • Nicktronic
            Samsung UN70NU6070F Standby Light flashes twice
            by Nicktronic
            Hey Everyone,

            So I've got this Samsung and the reported issue is that when powered on the backlight comes on, but no picture, no sound, it will flicker, the standby light will flash red twice and repeat the whole process...each loop lasts about 15 seconds.

            I've googled the issue and understand it is likely a panel/driver board issue, but was hoping the "tape method" could be successful. Before I did that though, I disconnected the left LVDS cable and powered the TV on. This time I got sound, no picture and the two blink standby light stopped. Did the same...
            03-27-2023, 07:01 PM
          • SJX1290
            No Standby Light on Samsung SAMSUNG UE65NU7022
            by SJX1290
            I have Samsung UN65MU6300FXZA with Mainboard BN41-02662A, dead , No Standby Light. I suspect result of main power jumping. Checked all voltages on main board ok,..
            My main suspect is bad flash memory, ...
            Any suggestions or can someone please​ check dump file, in the attachment
            Thank you...
            09-07-2024, 01:35 AM
          • Loading...
          • No more items.
          Working...