Vestel tv, how to flip the image?

[rayheart]

Here it is , thank you so much for the help!

[yokoono]

For 17MB82-17MB82S

1. Format a stick with FAT32
2. Unzip and put the 2 files on the stick. No folder.
3. Turn on the TV, USB stick and type MENU 4725
4. Go to USB Operations and type OK on the remote control
5. Wait 10 seconds and exit the menu (return, back)
6. Turn off the TV from the remote control
7. Wait until the stby LED on the TV stops flashing
8. Unplug the TV and wait until the stby light goes out.
9. Take out the stick and turn on the TV.
If the image is not correct, repeat the operation

[rayheart]

Its perfect , thank you so much! is there a post with an explanation of how to do it for future references?

[yokoono]

Possibly. I didn't search the forum.
I made a small mistake in the post above. I edited it.

[rayheart]

It´s ok it worked nonetheless i was junt wondering how you do it so i would bother you everytime this would happen

[Cristi23]

Can you help me with Vestel 17MB82S with VES315WNDB-2D-N11 panel? I have the image reversed.

[yokoono]

Can you help me with Vestel 17MB82S with VES315WNDB-2D-N11 panel? I have the image reversed.

1. Format a stick with FAT32
2. Unzip and put the 2 files on the stick. No folder.
3. Turn on the TV, USB stick and type MENU 4725
4. Go to USB Operations and type OK on the remote control
5. Wait 10 seconds and exit the menu (return, back)
6. Turn off the TV from the remote control
7. Wait until the stby LED on the TV stops flashing
8. Unplug the TV and wait until the stby light goes out.
9. Take out the stick and turn on the TV.
If the image is not correct, repeat the operation

[Cristi23]

The panel has flipped, but the image is not correct.

[yokoono]

The panel has flipped, but the image is not correct.

Theoretically the image should be correct. The profile is for what you have on TV. Try this.

[Cristi23]

I'll try this file. The original was 17MB97, but i replaced it with 17MB82S. I replaced it with what i had at home. The original mainboard get stuck on the HITACHI logo and restart after one minute.

[Cristi23]

Can you also help me with the JEIDA file? in case the one with vesa doesn't work?

[yokoono]

I'll try this file. The original was 17MB97, but i replaced it with 17MB82S. I replaced it with what i had at home. The original mainboard get stuck on the HITACHI logo and restart after one minute.

Copy the last profile given to TV and we'll discuss it further.
Hai bai Cristi, baga viteza ca nu stau toata ziua pe forum. Sa rescrii un profil dureaza max. un minut.

[Cristi23]

Incerc azi la 13. Inca n-am invatat cum se fac rescrierile astea... Revin azi cu verdictul. Multumesc anticipat.

[yokoono]

Incerc azi la 13. Inca n-am invatat cum se fac rescrierile astea... Revin azi cu verdictul. Multumesc anticipat.

I gave you the correct profile but it wasn't good. You said you rewrote it, the image came back but it's not correct. Then you say you didn't learn how to rewrite.
Something I don't understand.

Ti-am dat profilul corect dar nu a fost bun. Ai spus ca l-ai rescris, imaginea s-a intors dar nu este corecta. Apoi spui ca nu ai invatat cum se face rescrierea.
Ceva nu inteleg.

[Cristi23]

Eu m-am referit ca nu stiu sa fac acel fisier pe care l-ai trimis cu intoarcerea ecranului. Sa-l rescriu pe tv cu MENU 4725 - USB operations asta stiu. Scuze pentru neintelegere.

[Cristi23]

it works!