UN55LS003 panel help

[Storyteller12]

I have this tv, actually I have 2 with same symptom. Turn tv on and it shows to connect one connect and then vertical lines and colors appear.

pretty sure it’s the panel but don’t see the 2 points to jumper together to see which side of the panel it is to start with. . Anyone had this model and problem before. Any insight?

[lotas]

I found one point, it’s not visible from the second photo (it’s a reflection), take a better photo without glare.

[Storyteller12]

Let me know if these work

[lotas]

FB_TRDY_1 and FB_TRDY_3 must be connected together.

[Storyteller12]

Thank you. Now the troubleshooting begins

[Storyteller12]

With the test points connected I get no picture with either side of the lvds cables disconnected. Just some vertical lines and a green blob. Same for both TVs.

Tried covering the ckv lines and same result also.

any other ideas or suggestions before I scrap both

[lotas]

Carefully strip these test points from the mask and check the resistance with a multimeter to the ground and between them (should not be low or short).