ln52b630 main board

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • grumps13
    Member
    • Dec 2013
    • 12
    • USA
    #1

    ln52b630 main board

    I tried replacing the main board on my TV and when I got the new board my TV did not want to turn on. Although it took me some time to get a new board, I was only able to find a compatible board but when I switched the board my TV didn't want to turn on. I tried putting the old board back and it did the same. Originally, it would at least try to turn on a number of time until it finally would but now all I get is nothing. The front panel LED turns off when I hit the power button on the remote but I don't hear the turn on sound anymore. I had posted a thread previously about my issue and this is the link https://www.badcaps.net/forum/showth...light=ln52b630. I don't understand why now it will not even try to turn on anymore. did I somehow erase the firmware when I tried the new board? If someone can help it would be greatly appreciated.
    Thanks,
    grumps13
    Tags: None
    • grumps13
      Member
      • Dec 2013
      • 12
      • USA
      #2
      Re: ln52b630 main board

      Just to add to my problem. If I unplug the mainboard from the power supply the back lights still come on. With the mainboard connected, I will see the power indicator light on the front panel but when I hit the power button on the remote it turns off and stays off. Also, I can't seem to turn the TV on using the touch power button on the front panel and if I leave the TV connected for a long time without powering up, the power indicator light will remain on regardless if I hit the power button on the remote. also, here's the link to the original post again.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Dani_2024
          Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
          by Dani_2024
          Hi and thanks in advance for any input you might provide!
          I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
          Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

          Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
          5 Photos
          10-28-2024, 05:06 PM
        • jb_Bak
          Sony xbr-65x900c main board issues?
          by jb_Bak
          Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

          Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
          Power Board Connector that goes to Main board
          CN6401
          Pin 01 NC
          Pin 02 NC
          Pin 03 "BL_ON": 0V
          Pin 04 "N/C"
          Pin 05 "STBY 3.3V": 3.5V
          Pin 06 "GND": N/C
          Pin 07 "AC_OFF"...
          09-27-2021, 04:52 PM
        • cheeky2
          Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
          by cheeky2
          I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
          Obviously the same LVDS connector for the screen connection...
          05-25-2024, 03:27 AM
        • advant
          Driving a Sharp TCON/panel with a universal main board
          by advant
          This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

          I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
          02-03-2020, 12:25 AM
        • Asraf Atb
          Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
          by Asraf Atb
          Hi everyone,

          Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

          Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

          I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
          1 Photo
          01-27-2025, 05:02 PM
        • Loading...
        • No more items.
        Working...