Samsung QE55Q65B with shorted D001 diodes on panel board: Worth saving or not

[madyoyo]

Hi

I have a Samsung QE55Q65B with a seemingly common problem: it turn off and back on after a few seconds, (sometimes more, and in rare instances works for hours). D001 on the left side of the panel is very hot. I may be able to remove it with a very fine iron, but i don't have the equipment to re-solder such small parts.

Is there a risk to run the tv without this diodes diodes? And is it worth to pay someone else to replace it. I read many people who ended up with bad lines after trying to remove/replace them, , or the panel failing in another way, so i want to weight my options

Thanks

[EazyBone]

I use electrical clippers. Just cut it off, no solder iron needed. But to put something back, that's different story.