sharp 32inch lcd problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • munirutech
    Senior Member
    • Oct 2013
    • 72
    • Ghana
    #1

    sharp 32inch lcd problem

    hi

    i have a sharp lcd tv model LC-32D44E-BK when i put the power on the green power indicator comes on and the relay in will also close, after 10 - 12 seconds the green indicater light will blink ones and goes back to red stanby and the relay will cut back, any ideas on this sharp.

    thanks in advance
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: sharp 32inch lcd problem

      See here for repair:
      http://www.youtube.com/watch?v=5wUuARpFe90
      Last edited by tom66; 11-14-2013, 08:05 AM.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • munirutech
          Senior Member
          • Oct 2013
          • 72
          • Ghana
          #3
          Re: sharp 32inch lcd problem

          hi tom66

          thanks a lot tom the link was very helpful,now i have seen where my fault is and will fix it as soon as possible once again thanks.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • CoinCoin88
              Garage door RX unit (Cardin S38C) does not short relay to send opening signal
              by CoinCoin88
              Hello everyone,

              I'm turning to the Badcaps community to help me troubleshoot the radio Rx card from my (old) garage door opener. While I could just ditch that card and replace the whole system, I first would like to understand "why" it suddenly stopped working, because that's just how I am wired...!

              Some basics: the receiver works on a 30.875 Mhz frequency. Yes, I'm aware this is not in use anymore in a looot of places. It does not use any rolling code, it's just a regular dip-switch code that you have to set up on both the receiver and transmitter. The receiver...
              09-15-2025, 03:36 AM
            • theone111
              Problem with LG Plasma 60PM6700 - Random power downs
              by theone111
              I have an LG Plasma TV 60PM6700 for the past ~12 years.

              In the last ~3-4 months I have been having some issues.
              1. Problem: It started with random picture disappearing (sound still worked).
                Frequency: Happened about once a week.
                Solution: Had to turn off TV wait a few seconds before turning it on again.
              2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                Frequency: Happened about once a week.
                Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
              3. Problem: TV shuts down
              ...
              1 Photo
              07-22-2024, 10:36 AM
            • bscottjohnston
              Sharp LC-80UQ17U Power Supply Board problem
              by bscottjohnston
              I just picked up a Sharp LC-80UQ17U here in Denver on Craig's. The previous owner said he was watching it and "pop" it stopped. Opened it up to find a blown fuse on the high Voltage side of the PS. I bypassed it with a 7.5 Ampere automotive fuse and saw a flash in component NTC7001 (as the fuse popped). I am not going to try to apply any more power to the board until I can locate a schematic. Does anyone have the schematics to RUNTKB217WJQZ?

              ...
              02-17-2024, 06:03 PM
            • Zeonalbasta
              Thinkpad X1 Carbon "LMQ-1MB 12298-2 48.4LY26.021" VCC3M problem
              by Zeonalbasta
              i have a problem with thinkpad X1 carbon gen 2 "LMQ-1MB 12298-2 48.4LY26.021"
              The laptop was turned off because the MOSFET was not transmitting voltage. After checking it turned out that the gate pin on the MOSFET was the problem, because it was producing an inappropriate voltage. and it was discovered that the problem was with the Think engine, so I decided to reprint each pin, and finally the mosfet could work properly. However, there is another problem, even though the voltage has been supplied to the laptop, it still won't turn on, there isn't even an LED indicator. After double...
              09-13-2024, 01:17 PM
            • CuriousJohn
              Burco boiler power problem
              by CuriousJohn
              Burco BCPLSAFWM5L 5 Litre Wall Mounted Automatic Water Boiler With Filtration UK 240v

              Does anybody have any experience with these Burco units at all there is no record of them on the forum lol and a proper service manual would be nice. I invite you all to pesuade me not to botch repair it with a 5v relay, read on.

              This unit was rescued from a skip 3 years ago, the only fault it had then was no backight display (plus it wanted a new probe set and top seal) but the screen was never an issue you can still see the screen as is and I just use it to get 5 Litres of very hot...
              12-22-2024, 10:25 AM
            • Loading...
            • No more items.
            Working...