So picked this up for the shear hell of it, has a smashed screen so not much use other than for parts.
Removed the rear cover, quick visual inspection and basic tests found an O.C fuse on the PS b/d, replaced 6.3A 240V fuse and disconnected the panel tabs to T-Con b/d, powered on and nothing at all.
Removed PS b/d and found a nasty little surprise, Mosfet obviously shorted to chassis blowing the fuse, scorch mark directly below Mosfet 20N60S.
On testing with it in-circuit, neg probe to Source and pos probe to Gate get 1.5 on diode test setting, then move pos probe to Drain and its reading infinite, so is this part completely knackered? Is anything else likely to have gone with it or even caused it?
PS b/d: BN44-00155A
Main A/V b/d: BN41-00813D-MP1.0
T-Con b/d: V315B1-C01
Inverter: L315B1-16A (CMO)
Panel: V315B1-L01 Rev C3 (CMO-Chi Mie)
Removed the rear cover, quick visual inspection and basic tests found an O.C fuse on the PS b/d, replaced 6.3A 240V fuse and disconnected the panel tabs to T-Con b/d, powered on and nothing at all.
Removed PS b/d and found a nasty little surprise, Mosfet obviously shorted to chassis blowing the fuse, scorch mark directly below Mosfet 20N60S.
On testing with it in-circuit, neg probe to Source and pos probe to Gate get 1.5 on diode test setting, then move pos probe to Drain and its reading infinite, so is this part completely knackered? Is anything else likely to have gone with it or even caused it?
PS b/d: BN44-00155A
Main A/V b/d: BN41-00813D-MP1.0
T-Con b/d: V315B1-C01
Inverter: L315B1-16A (CMO)
Panel: V315B1-L01 Rev C3 (CMO-Chi Mie)
Attached Files
Comment