lcd pilot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • willyam1
    Senior Member
    • Feb 2012
    • 112
    • israel

    #1

    lcd pilot

    hi.
    this tv works ok but no respond to remote and to the switches in the side of the tv.
    only first power then cant power it off again and no respond to other swiches.
    main board is JUG7.820.964-4 CHASIS LS09 I THINK BY CHANGHONG.
    all reg voltage ok 3.3 2.5 1.2 remote and switches command is coming th the main board..
    service manual is needed or any aidia?

Related Topics

Collapse

  • cstout
    DeLonghi AC Remote only accepts 3V
    by cstout
    Hello all, I've been looking into this portable air conditioner's remote control and can't find what could be causing the problem - or possibly this remote is just terribly designed.

    The remote only works at exactly 3V - if I drop it any lower, using my bench power supply, to say, 2.9V then the remote will not flash the display and turn off. I don't have any AAA batteries that are exactly 1.5V each so I'm not sure if this remote is designed this way - to only use the freshest possible batteries, or if there's a failed component in the mix.

    I can't find any schematics...
    06-03-2024, 03:53 PM
  • Mc_Millian
    Toshiba 50lf711u20 fire tv remote not pairing
    by Mc_Millian
    Hello everyone,

    I was wondering if anyone could help my in pairing a remote with a Toshiba fire tv?
    The Tv model number is: 50lf711u20 Rev B.


    I've already replaced all the the circuit boards within the tv along with the I.R. sensor receiver.

    I've tried 3 different remotes which should be fully compatible with this TV.


    Oddly enough. A few if the buttons on all of the remotes actually work. Even without pairing...which makes no sense.

    The power button, along with the volume,back,select, and directional...
    04-07-2022, 12:15 PM
  • rustinjust
    Please help, where can I get a remote for my subwoofer?
    by rustinjust
    I’ve got a subwoofer that I’ve had for nearly 20 years, it did come with a basic remote which I’ve lost. It’s a generic make of subwoofer, I can’t see a brand sticker on it. It comes with 2 speakers.

    Question recently I’ve connected it up to my tv which has greatly improved the sound on my tv, however I’d like to be able to mute the subwoofer when ads come on or just mute it when the phone rings etc. I tried using a cheap all in one tv remote on the subwoofer and the volume button would only work to increase volume but not turn it down or mute it

    Is there...
    10-28-2023, 03:43 AM
  • codycowgill
    Lost christmas tree remote
    by codycowgill
    I have a rgb "holiday symphony" 600 led tree that I got for free but it has no remote which basically neuters the tree with just one color option and no music. The original remote is as 433.96 mhz rf remote. Here is the fcc link: https://fccid.io/2APJZ-PDT0093V.

    The manufacturer is Polygroup and are absolutely no help. As they offer no replacements to the most easily lost part. All they gave me was the model number of the remote and said google it and good luck. Of course nobody is selling them. Anyways I provided pictures of the reciever motherboard along with the rgb...
    12-31-2022, 06:22 PM
  • hemant_2222
    Schematic for Denon Remote Control RC1156
    by hemant_2222
    Hello Everyone,

    Hope everyone is enjoying their repairs at hand!.

    I am looking forward to get the schematic of Denon remote control RC1156. Actually long time no use of the remote leaked the battery thereby corroding few parts as well as the tracks.

    I was able to join few of them but the remote is still not working, so i am looking forward for your help, in case anyone understand the schematic or the remote circuit diagram and could me assist me in repairing it.

    Please refer to the attached picture, i think the voltage divider is missing...
    10-06-2023, 02:05 AM
  • Loading...
  • No more items.
Working...