Sanyo DP26648 no power indications at all

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jim1590
    Senior Member
    • Jul 2013
    • 98
    • USA

    #1

    Sanyo DP26648 no power indications at all

    As title says, no lights, no sound, no picture, appears as if not even plugged in.

    Have tried different outlets. Am not getting a volt reading when plugged in going to main board on 5v, 12v or 24v. But of course, I can't turn it on.

    Oh and like a fool, I was reseating the wires into the plastic plug to the power board from the wall and I forgot which one is positive and which one negative.... so any help there would be nice!
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Sanyo DP26648 no power indications at all

    Service manual
    http://www.tgohome.com/ServiceManual...&Search=Submit
    (make sure to get correct suffix version.)

    Check fuse on board?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • Jim1590
      Senior Member
      • Jul 2013
      • 98
      • USA

      #3
      Re: Sanyo DP26648 no power indications at all

      OK, I have the -00 chassis. I was also thinking fuse, but am having a problem finding it. The service manual only has a map of the main board.

      Thank you

      Comment

      Related Topics

      Collapse

      Working...