Panasonic TX-L32E6B - no picture :(

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • billybob6
    New Member
    • Aug 2013
    • 2
    • United Kingdom
    #1

    Panasonic TX-L32E6B - no picture :(

    Hi all,

    I've got a Panasonic TX-L32E6B LCD TV that refuses to display anything. I get the flashing green light at the start, which then turns solid green for a few seconds and then flashes red continually (three seconds gap between each 'blink'). No backlight is visible. I've tried replacing the inverter but that didn't make any difference. Can't see anything obviously wrong, i.e. no bulging capacitors, burnt components, etc.

    Any help would be very much appreciated. Thanks!
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • JJAAMM
      SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
      by JJAAMM
      This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

      Problem
      TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
      07-06-2023, 06:01 AM
    • APOPAP
      Panasonic National NV-M3 VHS Camera shuts down after some seconds
      by APOPAP
      Hello everybody,
      First post here. I have been reading posts here for some time now, but today I made my first account and post.
      The same question is also posted on another site, here it is:

      Just found an old Panasonic National NV-M3 VHS Camera without the original charger but with a special bag with a led, switch and fuse that is designed for a lead-acid 12v 6Ah battery. It has two cables coming off the bag that leads to the camera terminals (Only + and - ). Pretty sturdy design I think.

      I tried connecting it to a Computer PSU (12.7v) but I get battery error...
      08-25-2025, 10:12 AM
    • FZG
      Panasonic AG-1000B VHS player with bad picture quality
      by FZG
      Hello!

      I recently got an old VHS player from Panasonic and just for fun I want to try to repair this device. It is an AG-1000B portable VHS player from 1990 and it has a problem with picture quality in playback mode.

      Picture in playback mode is very noisy and often loses sync but the still images are nearly perfect.

      I want to know, is this something that could be solved by recapping or is the video head likely gone?

      Also, what mechanism is this?

      Any feedback is appreciated!...
      05-06-2024, 07:16 AM
    • ps2000
      Another Panasonic TX-P42U30B no picture, green power led on constantly
      by ps2000
      I did find a few of these in the search but seemingly not with my exact symptom.

      We noticed some strange colours on the screen for a while but once "warmed up" it was behaving.

      Now it will only show the green power light. On power up the green light does five rapid flashes (green not red) then goes to steady green and remains there. No response to the remote.

      Going through all the threads here, my first instinct was a bad SN board - suspecting the failure of the components due to poor earth that is well documented on here, but a couple of...
      05-02-2020, 09:19 AM
    • Bazfletch3
      Panasonic TH-65FX800A backlight LED's working but picture is very dark
      by Bazfletch3
      Hi all

      While I have quite a decent background in electrical & electronic troubleshooting & repairs, this is my first time stripping down an LCD TV for repair.... I have inherited a 3yr old Panasonic LCD which has a picture, but it is quite dark (too dark to be watchable - but still quite easy to see; I didnt need a torch to see it).

      I started by checking and trying to adjust all of the picture and backlighting levels, but that made little to no difference. I also did a factory reset.

      From there I envisaged that the backlighting wasn't working, however...
      01-08-2024, 10:18 PM
    • Loading...
    • No more items.
    Working...