Ilo 32" HDTV buttons or remote control don't work

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • newtotvrepair
    Member
    • Jul 2013
    • 13
    • USA

    #21
    Re: Ilo 32" HDTV buttons or remote control don't work

    Thanks Tom. I think I'll put a new button assembly in and see if that does it. It's an old tv and won't put much more effort into it than that. The new main board I can resell on ebay, so overall the repair should cost $15 for the button assembly + $45 for the board w/shipping - whatever I can resell it for. Your help is much appreciated.

    NTTR

    Comment

    • shovenose
      Send Doge Memes
      • Aug 2010
      • 6575
      • USA

      #22
      Re: Ilo 32" HDTV buttons or remote control don't work

      Originally posted by newtotvrepair
      Thanks Tom. I think I'll put a new button assembly in and see if that does it. It's an old tv and won't put much more effort into it than that. The new main board I can resell on ebay, so overall the repair should cost $15 for the button assembly + $45 for the board w/shipping - whatever I can resell it for. Your help is much appreciated.

      NTTR
      I don't know much about TV repair, but you might want to check the cable that runs between the board and the main board and make sure nothing's wrong with that - the insulation could have been cut.

      Comment

      Related Topics

      Collapse

      • piipo
        Old Privileg 5.1 speakers remote control question
        by piipo
        Hi, I have an old Privileg brand 5.1 speakers. I have lost the remote control. I have an universal Harmony remote but there is no Privileg brand in it's software to add. Does anybody have an idea what alternative brand for a remote can I try instead? I'm attaching an image of what the speakers looks like. The image shows 2 main speakers, they are 5 + 1 in total. Thank you very much
        09-18-2024, 01:55 AM
      • hemant_2222
        Schematic for Denon Remote Control RC1156
        by hemant_2222
        Hello Everyone,

        Hope everyone is enjoying their repairs at hand!.

        I am looking forward to get the schematic of Denon remote control RC1156. Actually long time no use of the remote leaked the battery thereby corroding few parts as well as the tracks.

        I was able to join few of them but the remote is still not working, so i am looking forward for your help, in case anyone understand the schematic or the remote circuit diagram and could me assist me in repairing it.

        Please refer to the attached picture, i think the voltage divider is missing...
        10-06-2023, 02:05 AM
      • tmhobadcap
        Pioneer VSX-522-K remote control not working???
        by tmhobadcap
        I have this receiver for at least 10 years. Usually, we just use the remote for turning on/off and adjusting the volume. Recently, the remote control started not able to turn the receiver on. Later, the volume also could not be adjusted by the remote control.

        At first, I thought that it was the usual problem which can be fixed by cleaning the contacts on the switches and the pcb. I opened the remote and clean it with alcohol. The remote did work again after that. But after one day, it did not work again. I opened it again and clean with alcohol and contact cleaner. Again it worked...
        12-24-2020, 01:44 AM
      • Mc_Millian
        Toshiba 50lf711u20 fire tv remote not pairing
        by Mc_Millian
        Hello everyone,

        I was wondering if anyone could help my in pairing a remote with a Toshiba fire tv?
        The Tv model number is: 50lf711u20 Rev B.


        I've already replaced all the the circuit boards within the tv along with the I.R. sensor receiver.

        I've tried 3 different remotes which should be fully compatible with this TV.


        Oddly enough. A few if the buttons on all of the remotes actually work. Even without pairing...which makes no sense.

        The power button, along with the volume,back,select, and directional...
        04-07-2022, 12:15 PM
      • wolf1976
        wireless receiver for 6 speeds fan control with remote control
        by wolf1976
        hi i have a receiver that is destroyed from the overvoltage i guess
        my question is has three wires u v w for driving a motor fan i found an other receiver wireless from aliexpresss with the same propertiew but for dc motor
        the motor fan has not label
        i have an other receiver operational
        In your opinion can i measure the voltage at the output ?
        what do you suggest me with a simple instrument multimeter or using someone instrument more specific ?
        thanks in advance...
        07-23-2025, 03:12 PM
      • Loading...
      • No more items.
      Working...