Puzzeled..Do I have bad caps? Video

[deviantink]

Re: Puzzeled..Do I have bad caps? Video

Do you know if that's the original or did the previous person swap it? All the pen markings are they yours or how it came? On the TV production label on the chassis can you locate the exact model version, that may help to work out what main you need.

I'm expecting 47LH30-UA.AUSJLUR as that's the only 47" one I can see with a PCB EAX5673810505 (0)

Just had a peak at the online parts listing here (AUS) for a 47lh35 and the main is referred to as a BPR Total Assembly EBU60723601, you can see the name CARRIER BPR above your PCB number EAX.....

Don't know if that was the orginial and all the markings on it are not from me. But I could also assume they are not from the factory too. All that i do know is it didn't power up.

Right, SVC # 47LH30-UA.AUSJLUR

Which from some searching from a few differnet sources tells me the main board should be..

EBU60680865


Seems like I will try and get one of these and see what it does...

My original problem was it would not cut on at all, replaced the main board (unkown #) with the 42 EBU60680850 and got the issue in the video.

[deviantink]

Re: Puzzeled..Do I have bad caps? Video

Update:

Thank you everyone for the help. This was a bad assumption on my end. I ordered the EBU60680865 board and everything works fine.